Originally Posted by dt69usa

i have a ce block that i have some questions on. Could this block be used in a 1967 vette as a reproduction if the original blew up? ----maybe.

Second, if i wanted to build back as a 427 435 hp, what intake, heads, and carb should i use.
----435 hp used the rectangular 3x2 intake manifold 3894374.

-----center carb number is list 3660, model 2300c, part number 3902355ev.

----front an rear carb numbers are list 3659, model 2300, part number 3902353eu.

Then you need to determine what dates are correct for your car and find these one month and not more than six months before your car's assembly date

also, would the 3917215 heads work for this block if it was not 435 hp.
---no, you will need the 3904391 heads unless you have a very late production car, then 3919840 heads. Again, you need to know your cars assembly date. You could also use the 3904392 aluminum heads for an l89 configuration.

You also need correct cam, lifters, push rods, springs, pistons, cam shaft, transistorized distributor/amp/harness, tri power ignition shielding, f 41 suspension, properly code rear end, and a few other items.

Is/was your vette a 427/435



thanks,

darrin.