new diiferantial
#1
Pro
Thread Starter
new diiferantial
Just got done installing new diff from tracdogg2 aka mike dyer wow what a piece of machinery works great no noise its a super 10 3:55 gears now I can tell how worn my old diif was Mike is the best been trying to get some pics in here. But have not had any luck yet
What a great Job he did. he did
Thanks Mike for all your help customer support is fantastic he will talk you through any question you have.
69 small block
What a great Job he did. he did
Thanks Mike for all your help customer support is fantastic he will talk you through any question you have.
69 small block
#3
Nam Labrat
Member Since: Sep 2013
Location: New Orleans Loo-z-anna
Posts: 33,899
Received 4,179 Likes
on
2,739 Posts
"DifferentWrenchial"!
Good to hear it's working well!
(My project car had a small clunk in the differential---turned out to be an improperly installed c-clip that warped and fell out of the groove...so I rebuilt the diff. while I was there...LOL)
Good to hear it's working well!
(My project car had a small clunk in the differential---turned out to be an improperly installed c-clip that warped and fell out of the groove...so I rebuilt the diff. while I was there...LOL)
#4
I haven't worked with Mike, but I have a Super-10 built by another guy named Gary Ramadei in the northeast part of the country. Now that I live in the DFW area, if I ever need another one done, I will definitely check him out. The stock differentials are a weak link, but I sleep very easy now knowing that the diff is up to the job. Now, if I could only afford the HD 31-spline outer axles, the whole drive-line would be bullet proof.
#5
Team Owner
Member Since: Jul 2004
Location: Redondo Beach, California
Posts: 39,566
Received 548 Likes
on
375 Posts
For the really high performance differentials and rear end parts, both Mike and Gary, as far as I know, buy many/most/all their parts from Tom's Differential. When Tom was still in Bellflower, Ca, circumstances were that I spent hours in Tom's shop and this was in the latter days just before he moved to Idaho. We talked about many things..one of the reasons he left California was an very unpleasant encounter with the Environmental Protection Agency. Anyhow, of all his customers for his parts, I remember he had favorable things to say about Gary and Mike.
#6
Drifting
I haven't worked with Mike, but I have a Super-10 built by another guy named Gary Ramadei in the northeast part of the country. Now that I live in the DFW area, if I ever need another one done, I will definitely check him out. The stock differentials are a weak link, but I sleep very easy now knowing that the diff is up to the job. Now, if I could only afford the HD 31-spline outer axles, the whole drive-line would be bullet proof.