tixeon

I would like to convert my 80 to serpentine belt set up using a f-body set up. The water pump doesn't have provision for a heater hose fitting. I have red several posts about serpentine conversions and haven't seen this addressed. How are the heater hoses ran on the conversion? Dave

MIKE80

I used an Edelbrock Victor Jr. reverse flow water pump which the heater hose connected to the top of. The other heater hose connected to the front of the intake manifold.

vetteaddic

I think a 91 chevy truck wp has a water port on top.

tixeon

Thanks for your replys.