Made changes now hydroboost is jittery
#1
Instructor
Thread Starter
Member Since: Jul 2007
Location: Lewisville Texas
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Made changes now hydroboost is jittery
I just installed a Borgeson steering box and new steering pump. Now my hydroboost feels jittery and whines (not much) when I apply the brakes. Is this a result of not having enough flow or too much flow? If not, what else could cause this? It didn’t happen before I added the Borgeson and pump.
#2
Melting Slicks
Member Since: Feb 2009
Location: Dallas Georgia
Posts: 2,787
Received 594 Likes
on
408 Posts
2020 Corvette of the Year Finalist (track prepared)
C3 of Year Winner (track prepared) 2019
Sounds like you might have some air in the lines. Make sure your return line clamps are very snug!
#3
Melting Slicks
Member Since: May 2002
Location: Sulphur LA
Posts: 2,686
Received 105 Likes
on
95 Posts
St. Jude Donor '05-'06,'11,'13-'14,'16,'18,'19
I just installed a Borgeson steering box and new steering pump. Now my hydroboost feels jittery and whines (not much) when I apply the brakes. Is this a result of not having enough flow or too much flow? If not, what else could cause this? It didn’t happen before I added the Borgeson and pump.
How did you plumb the return line from the Hydroboost?
Pressure in the return line from the Hydroboost will cause issues.
Neal