Digital display repair shop?
07-20-2006, 06:12 PM
#1
Intermediate
Thread Starter
Member Since: Aug 2003
Location: Deltona FL
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Digital display repair shop?
Where is a good place to send off an 84 digital display for repair. I posted about 2 years ago on this specific problem and I got several places to send it off to but my computer crashed. I really appreciate any advice and opinions you could send my way. I noticed Ecklers repairs but they seem expensive.
Thanks for all your help
Ben
Thanks for all your help
Ben
07-20-2006, 07:38 PM
#3
Safety Car
Member Since: Mar 2005
Location: Fredonia WI
Posts: 3,567
Received 491 Likes
on
392 Posts
2023 C4 of the Year Finalist- Modified
Finalist 2020 C4 of the Year - Modified
C4 of Year Finalist (performance mods) 2019
2018 C4 of Year Finalist
Jim Adams is THE MAN for digidash rebuilding
I spent a lot of time researching the various rebuild shops (I doubt the Corvette suppliers rebuild clusters in house). I took my cluster apart just to see if I could repair it but I had broken LCDs.
I highly recommend Jim Adams of WitchCity Engineering (witchcityeng@yahoo.com 978-335-4096) He did the work well and returned the unit in 1 day. He cleaned everything up, replaced the lights, bypassed the bad light sensor and replaced two defective LCD panels for $317 shipped. I've been pleased with the cluster since he rebuilt it
Of the places I contacted, Jim was the only one to respond intelligently to my email messages. I wanted to know prices, options, etc. The others said "mail it in and we'll let you know." Jim's prices were very reasonable also.
Gary
I highly recommend Jim Adams of WitchCity Engineering (witchcityeng@yahoo.com 978-335-4096) He did the work well and returned the unit in 1 day. He cleaned everything up, replaced the lights, bypassed the bad light sensor and replaced two defective LCD panels for $317 shipped. I've been pleased with the cluster since he rebuilt it
Of the places I contacted, Jim was the only one to respond intelligently to my email messages. I wanted to know prices, options, etc. The others said "mail it in and we'll let you know." Jim's prices were very reasonable also.
Gary
07-20-2006, 08:34 PM
#4
Safety Car
Member Since: Aug 1999
Location: Fort Lauderdale FL
Posts: 4,931
Likes: 0
Received 3 Likes
on
3 Posts
Originally Posted by ghlkal
I spent a lot of time researching the various rebuild shops (I doubt the Corvette suppliers rebuild clusters in house). I took my cluster apart just to see if I could repair it but I had broken LCDs.
I highly recommend Jim Adams of WitchCity Engineering (witchcityeng@yahoo.com 978-335-4096) He did the work well and returned the unit in 1 day. He cleaned everything up, replaced the lights, bypassed the bad light sensor and replaced two defective LCD panels for $317 shipped. I've been pleased with the cluster since he rebuilt it
Of the places I contacted, Jim was the only one to respond intelligently to my email messages. I wanted to know prices, options, etc. The others said "mail it in and we'll let you know." Jim's prices were very reasonable also.
Gary
I highly recommend Jim Adams of WitchCity Engineering (witchcityeng@yahoo.com 978-335-4096) He did the work well and returned the unit in 1 day. He cleaned everything up, replaced the lights, bypassed the bad light sensor and replaced two defective LCD panels for $317 shipped. I've been pleased with the cluster since he rebuilt it
Of the places I contacted, Jim was the only one to respond intelligently to my email messages. I wanted to know prices, options, etc. The others said "mail it in and we'll let you know." Jim's prices were very reasonable also.
Gary
I agree Jim is a good guy. I bought LCD's from him in the past and he does do repair work. I don't know whay I forgot to mention his name
