vettekid12

ok have a few questions. i have an 88 l98 tpi.. fully built right now procharged. only thing stock is the water pump. I havnt found anyone able to tune it. Ive heard that you can convert the ecu and harness to ls1 or ls2 is this possible? will i have to change anything on the motor itself? where can i get a kit to do this? any and all info in doing this is very well appricated

vetteoz

See
LS1
http://www.eficonnection.com/eficonnection/24x.aspx

LS2
http://www.eficonnection.com/eficonnection/58x.aspx

bjankuski

You can tune it with the conversion kit from EFI connection as listed by Vette OZ, you can also tune it with the stock 165 ECM with a blowerworks MAF sensor or convert it to the 730 ECM and tune it.

I have done it all three ways and each can be made to work.

vettekid12

thanks.. ive actually been in contact with blowerworks.. he told me to put my stock pulleys back on or buy oversized ones.. so thats what im doing next before i do this ecu conversion.. and im getting as much info on it as possible.. thanks