Dana 44 and Dana 36 Half shafts.
09-20-2003, 11:04 AM
#4
Dana 44 and Dana 36 Half shafts.
It's going to be hit or miss. The rear will be fine, or it'll snap. If you're overly concerned, get a long straight edge and paint a line on the half shafts. You can monitor them for twisting.
I know Scorp and a few other guys bring spare half shafts when they race, sometimes a 5 hour one way travel time without a trailer. That's beyond ballsy!!
I know Scorp and a few other guys bring spare half shafts when they race, sometimes a 5 hour one way travel time without a trailer. That's beyond ballsy!!
09-20-2003, 11:33 AM
#5
Team Owner
Re: Dana 44 and Dana 36 Half shafts. (Jay 383)
All C4 halfshafts are the same except for a few 1990 ZR1s got steel shafts. Besides that they are all identical Dana 36 or Dana 44.
Like Jay said my friends and I from MA bring halfshafts and the tools to change them with us on long race trips. Usually along with an alternator and some plug wires too. :D
Like Jay said my friends and I from MA bring halfshafts and the tools to change them with us on long race trips. Usually along with an alternator and some plug wires too. :D