** Official FI Owners Club **
#404
Burning Brakes
2005 Z51, 6 speed - Forged stock cube LS3, AFR 230's, FAST 102, Aruns Jam Cam, ARH headers, Magnaflow bullets, ECS kit, currently waiting on my 2200R to show up, tune and numbers soon.
#407
A&A v3SI, 10psi, Kooks 1 7/8 headers, catless x-pipe, GHL bullets. 460/440. 91 octane, 3.48" pulley. 110* OAT/135* IAT.
CPR Custom Cam and associated hardware go in next week along with an Alkycontrol meth kit.
CPR Custom Cam and associated hardware go in next week along with an Alkycontrol meth kit.
#409
#411
Instructor
Z06 Sleeper - 2004 Z06 , Vortech V2 , A+A set with 3.6 pulley, Race Shop Installed/Tuned, 606 RWHP/515 RWT PLUS Custom Nitrous System already installed ( ? 700 RWHP tbd with dry stage and ? 850 RWHP tbd with wet stage - maybe if i lose the rest of my mind )
#414
Pro
02 Z06, 68k miles.
A&A, 3.8 pulley, Ron Davis w EOC, LG Super Pro LT w Borla Stingers. No idea on power figures, it was tuned 2010 but I don't have any dyno sheets.
I got the car June last year and have added coilovers, radiator, wheels and tires.
Took it to Laguna Seca yesterday for a track event and noticed that I have a pretty decent vibration at 2500 lasting to 3000 rpm, pretty high frequency vibration, almost like a buzz. I have been assuming the following:
Harmonic Balancer (?)
Exhaust/header vibration (?)
Crank (hopefully not) (?)
I was going to get the car dyno'd by A&A but now I want to fix the vibration before doing that.
#415
Burning Brakes
STS TT w/ upgraded BW bullseye turbos
Stock internals
Alky control meth
534/556 @10#
M6 upgraded, 3.73 upgraded
Turbowerx pump
N2MB 2 step
stage 2 coming: Forged 9.5 347
TFS 215 heads, roller rockers HS
Rearmount turbo specific custom comp cam
35-50 shot zex
el boost control
Stock internals
Alky control meth
534/556 @10#
M6 upgraded, 3.73 upgraded
Turbowerx pump
N2MB 2 step
stage 2 coming: Forged 9.5 347
TFS 215 heads, roller rockers HS
Rearmount turbo specific custom comp cam
35-50 shot zex
el boost control
#417
Intermediate
Member Since: Feb 2015
Location: Phoenix Arizona
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
New Dyno Numbers
Finally got my car finished for now...
2000 C5 M6 LS1
ECS Novi 1500 No restrictor plate 10 PSI
CPR Custom Cam 225/236 621/624
Valve Springs
Alky Control Single Nozzle meth
1 7/8" Header no Cats with Borla axle back
RXT Clutch
Made 639/546 in 110 degree weather here in Phoenix, AZ...Hoping for another 20-30 HP when I redyno in the winter. Thank you to all the people on the Forums and the Vendors for all your help.
2000 C5 M6 LS1
ECS Novi 1500 No restrictor plate 10 PSI
CPR Custom Cam 225/236 621/624
Valve Springs
Alky Control Single Nozzle meth
1 7/8" Header no Cats with Borla axle back
RXT Clutch
Made 639/546 in 110 degree weather here in Phoenix, AZ...Hoping for another 20-30 HP when I redyno in the winter. Thank you to all the people on the Forums and the Vendors for all your help.
#418
A&A intercooled kit with si3 making 12lbs with meth inj., texas speed long tubes, howards cam, Thompson fully forged stroker (blew up stock 40000 mile ls1), ported heads, makes 730 with very quiet STOCK ti mufflers. LOVE to cruse in it now. It's so stock until you push the go petal. Oh, and don't touch the stupid button with the little car on it, you will die!
#419
Melting Slicks
Member Since: Jan 2008
Location: Nathalie VA
Posts: 2,590
Likes: 0
Received 47 Likes
on
45 Posts
St. Jude Donor '15-'16-'17-'18
This post hasent been updated since 2009. May want to post up in here.
https://www.corvetteforum.com/forums...ower-club.html
https://www.corvetteforum.com/forums...ower-club.html