Thoughts on Mighty Mouse Catch Can Install
#21
Melting Slicks
Thread Starter
Doing some mock up tonight. Looks like it will mount off the A&A Procharger bracket with no issue. I am just making a bracket out of a straight 1 1/2" wide scrape I had laying around. What I did find was to make the turn from the oil fill AN adaptor was to close. I could make it work with a long loop but it will be ugly. Now the thought would be to change and pull from the drivers side (make dirty) -10 port and make the clean side come -10 welded on valve cover to blower inlet. That way I can run straight forward and T of the valley port on the way. I will call mm to confirm before moving forward.
Last edited by JeremiahsC5; 04-19-2016 at 07:50 PM.