Pistons and Connecting Rods
03-25-2002, 03:29 PM
#2
Burning Brakes
Member Since: Dec 1999
Location: Atlanta GA
Posts: 1,121
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pistons and Connecting Rods (StormCrow)
The rods are powdered metal and the pistons are hyperutetic (sp?) which is neither forged nor cast. The crank is cast iron I believe.
The week link is the rods if you are running a lot of rpm and the ring lands on the pistons if you run a lot of cylinder pressure or have detonation.
The week link is the rods if you are running a lot of rpm and the ring lands on the pistons if you run a lot of cylinder pressure or have detonation.
