BBK intake and throttle body
#1
Melting Slicks
Thread Starter
Member Since: Jul 2004
Location: orlando florida
Posts: 3,092
Received 114 Likes
on
98 Posts
St. Jude Donor '15
BBK intake and throttle body
bought this off a guy on corvetteforum for $200.00 shipped. his turbo vette grenaded and did a little damage to #7. can be fixed.
decided to do some port cleanup. really rough casting and already had a tiny bit of porting done.
before
used my 6" long porting bit to get deep into the port. this is using a 60 grit flapper wheel to smooth it down
finished up with a 120 grit flapper wheel.
decided to do some port cleanup. really rough casting and already had a tiny bit of porting done.
before
used my 6" long porting bit to get deep into the port. this is using a 60 grit flapper wheel to smooth it down
finished up with a 120 grit flapper wheel.
The following users liked this post:
mrr23 (09-10-2015)