Need Contact at Bowling Green, KY Plant
08-26-2010, 11:10 AM
#1
Safety Car
Thread Starter
Member Since: Jan 2009
Location: Mooresville (Race City USA) NC
Posts: 4,681
Likes: 0
Received 2 Likes
on
2 Posts
Need Contact at Bowling Green, KY Plant
I'm a retired automotive supplier engineer who has a quality improvement suggestion to make regarding assembly procedure on the Vette engine. I need the name, title and e-mail address of a process engineering manager at the Bowling Green plant to contact. Can someone on this Forum help facilitate this?
Thanks in advance.
Thanks in advance.
08-26-2010, 11:36 AM
#2
Team Owner
Call the NCM...??
I would say contact Adam Boca via PM but I understand he is at Carlisle
I would say contact Adam Boca via PM but I understand he is at Carlisle
08-26-2010, 12:20 PM
#3
Team Owner
You might contact Andrea Hales
Plant Communications Manager
Cell: 270-392-6182
Andrea.hales@gm.com
She can probably get you in touch with the Manufacturing Engineering Mgr.
Plant Communications Manager
Cell: 270-392-6182
Andrea.hales@gm.com
She can probably get you in touch with the Manufacturing Engineering Mgr.
08-26-2010, 12:33 PM
#4
Team Owner
Member Since: Jun 2005
Location: Northern, VA
Posts: 46,106
Received 2,481 Likes
on
1,944 Posts
St. Jude Donor '15
"In honor of jpee"
why not email the fellow from wixon who posts on here? I think his handle is "eaglei". His name is Don Henley.
08-26-2010, 02:52 PM
#6
Team Owner
All of these suggestions should be sent in via the owner feedback link on the Bowling Green Assembly plant website. This is exactly why this system was setup (and a lot of time and money invested in it.) Bowling Green is the only plant of its kind with a direct line in to the plant for the customer. Go to the main website for the plant which you can reach at:
http://bowlinggreenassemblyplant.com/
At the bottom of the page you will find a yellow button labelled "Owner Feedback", click it.
You will be asked to validate your owner status with a VIN entry. Once done an area will display that you can type your suggesstion. Please add your email or phone contact information and request that you would like to hear back from someone regarding your suggestion. Comments and suggestions submitted via this channel are all reviewed and screened but they will get to the right group at the plant. Any other avenue in to the plant is not recommended.
Paul
If you are unsuccessful with this approach for whatever reason or if you are uncomfortable with this approach, email me.
http://bowlinggreenassemblyplant.com/
At the bottom of the page you will find a yellow button labelled "Owner Feedback", click it.
You will be asked to validate your owner status with a VIN entry. Once done an area will display that you can type your suggesstion. Please add your email or phone contact information and request that you would like to hear back from someone regarding your suggestion. Comments and suggestions submitted via this channel are all reviewed and screened but they will get to the right group at the plant. Any other avenue in to the plant is not recommended.
Paul
If you are unsuccessful with this approach for whatever reason or if you are uncomfortable with this approach, email me.
Last edited by talon90; 08-26-2010 at 02:55 PM.
08-26-2010, 03:05 PM
#7
Team Owner
Member Since: Jun 2005
Location: Northern, VA
Posts: 46,106
Received 2,481 Likes
on
1,944 Posts
St. Jude Donor '15
"In honor of jpee"
I didn't know that....thanks Paul! 
