C6 Corvette General Discussion General C6 Corvette Discussion not covered in Tech
Sponsored by:
Sponsored by:

Disconnect battery then get power window issue

Thread Tools
 
Search this Thread
 
Old 08-29-2016, 11:01 PM
  #1  
gp56
Drifting
Support Corvetteforum!
Thread Starter
 
gp56's Avatar
 
Member Since: Feb 2010
Location: Levittown NY
Posts: 1,393
Received 18 Likes on 18 Posts

Default Disconnect battery then get power window issue

I haven't disconnected my battery too frequently, only having done it 3 times in the past 2 years. Each time when the battery was reconnected the drivers side window would not go up or down when pressing the switch. Passenger side works fine from drivers side control. If I slam the drivers door the window then operates normally and I never have the issue again. What could be causing this?
Old 08-29-2016, 11:12 PM
  #2  
owc6
Team Owner
 
owc6's Avatar
 
Member Since: Apr 2013
Posts: 24,550
Received 4,186 Likes on 2,679 Posts

Default

Have you tried initializing (re-indexing the windows)?

It needs to be done every time the battery is disconnected.
Old 08-29-2016, 11:28 PM
  #3  
gp56
Drifting
Support Corvetteforum!
Thread Starter
 
gp56's Avatar
 
Member Since: Feb 2010
Location: Levittown NY
Posts: 1,393
Received 18 Likes on 18 Posts

Default

I can re index once the drivers window responds.
Old 08-30-2016, 09:37 AM
  #4  
Landru
Race Director

 
Landru's Avatar
 
Member Since: Dec 2002
Location: Wayne Township WI
Posts: 10,240
Received 1,047 Likes on 821 Posts

Default

Originally Posted by gp56
I can re index once the drivers window responds.
Need to find out if this is a issue or an electronic glitz.
If slamming door makes window work, re-index immediately and see if it holds. If it doesn't might be a failing regulator w/ no link to disconnecting battery. Weirder things have happened.
Old 08-30-2016, 04:00 PM
  #5  
gp56
Drifting
Support Corvetteforum!
Thread Starter
 
gp56's Avatar
 
Member Since: Feb 2010
Location: Levittown NY
Posts: 1,393
Received 18 Likes on 18 Posts

Default

Originally Posted by Landru
Need to find out if this is a issue or an electronic glitz.
If slamming door makes window work, re-index immediately and see if it holds. If it doesn't might be a failing regulator w/ no link to disconnecting battery. Weirder things have happened.
Once I slam the door to get window to work it performs flawlessly until the next time I have to disconnect battery.
Old 08-30-2016, 05:01 PM
  #6  
Landru
Race Director

 
Landru's Avatar
 
Member Since: Dec 2002
Location: Wayne Township WI
Posts: 10,240
Received 1,047 Likes on 821 Posts

Default

Originally Posted by gp56
Once I slam the door to get window to work it performs flawlessly until the next time I have to disconnect battery.
Weird, thought you'd have to first slam door before it did anything.
A loose connection?
Having to slam door's somewhat a clue, same w/ a failing regulator.

IF it works now then leave it alone & leave battery connected, motor on.
IF either of above (loose connector/reg) begins giving problems it'll only worsen as time goes on & force your action.
In the meantime you've a functioning window, pretty fortunate in the world of C6. When something goes it's usually immediate often leaving one stuck wherever they are.

Get notified of new replies

To Disconnect battery then get power window issue




Quick Reply: Disconnect battery then get power window issue



All times are GMT -4. The time now is 04:19 PM.