CxRacing Single Turbo Kit
#1
Racer
Thread Starter
CxRacing Single Turbo Kit
I have been eyeing this kit lately. More than likely, i will upgrade turbo down the road & possibly intercooler! I have heard Tial BOV do not work with the system, therefore; what is a better BOV that will work? I will also be upgrading injectors & fuel pump in order to run e-85. Is my goal for 700 rwhp on my ls2 a "safe" power level? Mods are PRC 243 Heads, Cam, Full Bolt Ons (including fast 102 manifold, Meziere water pump, fast fuel rails, Nick Williams 102 TB).
PS. I plan on doing a bumper exhaust exit.
Any recommendations and tips are more than welcome
PS. I plan on doing a bumper exhaust exit.
Any recommendations and tips are more than welcome
Last edited by Sergio7; 03-23-2017 at 09:02 PM.
#2
Racer
i did a quick look at the site. I personally would not want it due to no A/C. This is item #2
from web page:
Note:
1. This Kit Needs to Remove Stock Radiator, Replaces It with Our New Radiator.
2. Needs to Remove A/C (Don't Have Room For A/C Condenser).
3. Need to Drill Oil Return Port on the Oil Pan for Turbo Oil Return.
4. Need to Work On the Exhaust System to Connect to the Downpipe (Due to Many Exhaust Options, The Downpipe Is NOT Connected to Stock Exhaust).
5. This Kit Is For Turbo Hardware ONLY, You Will Need to Upgrade Engine's Fuel System and Tune the Engine.
6. For Automatic Transmission, Need to Add An External Oil Cooler, NOT Included. For Manual Transmission, It Is Highly Recommended to Upgrade the Oil Cooler As Well.
7. There Is NO Installation Guide Provided, However, We Show Many Installed Pictures On Car and On Engine Stand.
UPP makes a great twin turbo system. They are a forum sponsor. http://uppturbo.com/
from web page:
Note:
1. This Kit Needs to Remove Stock Radiator, Replaces It with Our New Radiator.
2. Needs to Remove A/C (Don't Have Room For A/C Condenser).
3. Need to Drill Oil Return Port on the Oil Pan for Turbo Oil Return.
4. Need to Work On the Exhaust System to Connect to the Downpipe (Due to Many Exhaust Options, The Downpipe Is NOT Connected to Stock Exhaust).
5. This Kit Is For Turbo Hardware ONLY, You Will Need to Upgrade Engine's Fuel System and Tune the Engine.
6. For Automatic Transmission, Need to Add An External Oil Cooler, NOT Included. For Manual Transmission, It Is Highly Recommended to Upgrade the Oil Cooler As Well.
7. There Is NO Installation Guide Provided, However, We Show Many Installed Pictures On Car and On Engine Stand.
UPP makes a great twin turbo system. They are a forum sponsor. http://uppturbo.com/
#3
Racer
Thread Starter
Originally Posted by needcheese
i did a quick look at the site. I personally would not want it due to no A/C. This is item #2
from web page:
Note:
1. This Kit Needs to Remove Stock Radiator, Replaces It with Our New Radiator.
2. Needs to Remove A/C (Don't Have Room For A/C Condenser).
3. Need to Drill Oil Return Port on the Oil Pan for Turbo Oil Return.
4. Need to Work On the Exhaust System to Connect to the Downpipe (Due to Many Exhaust Options, The Downpipe Is NOT Connected to Stock Exhaust).
5. This Kit Is For Turbo Hardware ONLY, You Will Need to Upgrade Engine's Fuel System and Tune the Engine.
6. For Automatic Transmission, Need to Add An External Oil Cooler, NOT Included. For Manual Transmission, It Is Highly Recommended to Upgrade the Oil Cooler As Well.
7. There Is NO Installation Guide Provided, However, We Show Many Installed Pictures On Car and On Engine Stand.
UPP makes a great twin turbo system. They are a forum sponsor. http://uppturbo.com/
from web page:
Note:
1. This Kit Needs to Remove Stock Radiator, Replaces It with Our New Radiator.
2. Needs to Remove A/C (Don't Have Room For A/C Condenser).
3. Need to Drill Oil Return Port on the Oil Pan for Turbo Oil Return.
4. Need to Work On the Exhaust System to Connect to the Downpipe (Due to Many Exhaust Options, The Downpipe Is NOT Connected to Stock Exhaust).
5. This Kit Is For Turbo Hardware ONLY, You Will Need to Upgrade Engine's Fuel System and Tune the Engine.
6. For Automatic Transmission, Need to Add An External Oil Cooler, NOT Included. For Manual Transmission, It Is Highly Recommended to Upgrade the Oil Cooler As Well.
7. There Is NO Installation Guide Provided, However, We Show Many Installed Pictures On Car and On Engine Stand.
UPP makes a great twin turbo system. They are a forum sponsor. http://uppturbo.com/
#5
Advanced
I was looking into the CX kit as well. I wish more people had the kit for reviews. I would not get the upp kit, bc you have to hack up so much of your car to fit it. Also I have been told by employees that they would never run the supplied turbos on their personal cars.
#6
I have the cx racing headers crossover and rad/intercooler combo but i will be running a borg warner turbo. The kit looks to be very nice and fits decent so far. The rad and intercooler kit comes with all the brackets and bolts you need. I am remiving my ac because i want a rear exiting exhaust only down side i have found so far.
The following users liked this post:
unitedelements (03-24-2017)
#8
Racer
Thread Starter
Originally Posted by Enjoiskater
I have the cx racing headers crossover and rad/intercooler combo but i will be running a borg warner turbo. The kit looks to be very nice and fits decent so far. The rad and intercooler kit comes with all the brackets and bolts you need. I am remiving my ac because i want a rear exiting exhaust only down side i have found so far.
#10
Former Vendor
#11
Advanced
#12
Former Vendor
1. There's a big difference between "employees" and disgruntled ex-employees.
2. Brett (your first post) conveniently didn't mention that he also managed to destroy two Precision turbos on the same car.....The turbos were never the problem....
2. Brett (your first post) conveniently didn't mention that he also managed to destroy two Precision turbos on the same car.....The turbos were never the problem....
#13
Racer
Thread Starter
Originally Posted by Enjoiskater
Turbo is gonna be a borg warner s475 with a 1.10 t4 exhaust housing. Also i forgot to mention i did have to drill and weld on bungs for the 02 sensors.
#14
I didnt get a bov woth mine i bought just the intercooler and rad im gonna build my own pipes but ill prolly run a tial q. And yes its gonna be stock bottom end with btr cam package ls9 head gaskets and head studs. Im hoping for 750-800 on e85.