C6 Tech/Performance LS2, LS3, LS7, LS9 Corvette Technical Info, Internal Engine, External Engine, Tech Topics, Basic Tech, Maintenance, How to Remove & Replace
Sponsored by:
Sponsored by:

Bad

Thread Tools
 
Search this Thread
 
Old 10-24-2014, 11:32 AM
  #1  
l7i7o7n
Intermediate
Thread Starter
 
l7i7o7n's Avatar
 
Member Since: Feb 2010
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts

Default Bad

I have a c6 ls2 corvette procharged and crammed. When I changed the cam, and the heads to l92 heads I was not very smart, and I put an ls2 head gasket on the car. How much will that affect the performance of the vehicle? If any at all.
Old 10-24-2014, 12:12 PM
  #2  
timd38
Race Director
 
timd38's Avatar
 
Member Since: Aug 2005
Location: Hudson WI
Posts: 13,598
Received 181 Likes on 162 Posts
NCM Sinkhole Donor

Default

It only matters if you go to a bigger bore.
Old 10-24-2014, 06:16 PM
  #3  
0Anthony @ LGMotorsports
Former Vendor
 
Anthony @ LGMotorsports's Avatar
 
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes on 300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13


Default

Depends on when you got the head gaskets too.....lately I have noticed they are marked 6.0/6.2L on all LS2/LS3 gaskets. Only the LS9 (thicker) and the LT1 gaskets are different (LT1's are red color now too)

Get notified of new replies

To Bad




Quick Reply: Bad



All times are GMT -4. The time now is 07:35 PM.