JSBVette513

My parking brake sensor on my 08 m6 base is acting up. Sometimes when engaging my PB it illuminates on the dash, other times it does not. The light is not what bothers me, however, the auto recall for removing my 235lb self from a two door coupe not engaging is the aggravating part. It will not let me exit mode until the PB light is illuminated. Nor will my hatch release, all kinds of other small stuff...

Thanks in advance for the help

HoustonGSXR

Reset your ECU and see if it will fix the problem.

JSBVette513

how do you reset the ecu?

timd38

Sounds like a lot of work!

https://www.corvetteforum.com/forums...ke-switch.html

JSBVette513

That one sounds like a brake pedal calibration issues. My problem is with my E Brake sensor engaging.

Thanks for the help

timd38

Sorry.

JSBVette513

my post sounded like I was being smart. Sorry, was saying thanks for trying to help. I do appreciate it.

HoustonGSXR

Unhook the battery cables and let it sit for 15 mins.

timd38

No worries. I thought you were being nice!

The switch is on the front side of the parking brake lever. It may be dirty or the wire broke off.

HoustonGSXR

Did the problem fix?

cclive

Try spraying those switch contacts with some cleaner...the switch is a very simple one and is likely just dirty. Maybe no need to replace it.

JSBVette513

Thanks for the help guys. Now just for the write up on removing center console. Just bought and MGW Short throw so while im in there im gonna clean it up.