Ü | umnitza.com | C6 Lenses Production Announcement Kickstarter
10-13-2016, 03:41 PM
#1
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,653
Received 328 Likes
on
262 Posts
Ü | umnitza.com | C6 Lenses Production Announcement Kickstarter
We are running a kickstarter campaign to develop, produce, distribute, and retail Corvette C6 headlight lenses. We've already got a strong list with some contributors, but we've done almost no advertising other than some limited emails to folks that are interested.
Currently there are 15 pre-orders on this list comprised of 3 actual kickstarter backers and 12 pre-paid pre-orders.
In order for this to be successful, we need your help!
There are 4 ways to pre-order:
1) Kickstarter
2) Umnitza.com Site
3) Through C6Performance Site
4) Or by Calling us 877 486 6489
Happy to be on board
PS: We're not yet listed as a vendor but have already signed the contract with the forum owners to be listed as one. Please contact IB for details thanks
PPS: read through the bio on Kickstarter
======
SUMMARY*
COMMENTS ABOUT OUR PRODUCT/SERVICE
We think our product and services speak for themselves and we want to make a case for it here. Buy your lenses here
We will always err on the side of too much communication vs no communication.
Details
Do you have any emergency units left?
The initial batch of 16 sets of lenses are making their way into the hands of their pre-order buyers from September and October. The short answer is no, all the 16 units are in usage.
So if you are in November, December, January, etc. your lenses will ship on or around April 7th-10th, this may be delayed due to some customs issues as usual, but we have already pre-cleared the shipments and have a telex release done.
DOT
There are some positive DOT developments with a local DOT certification lab in our area. We will have those posted when ready. But suffice it to say, we're going to have some info for those of you worried about Canadian DOT/US DOT.
Who is the lucky one?
The lenses we did received have been shipped out, so you should start seeing some reviews shortly, especially from John T who just received his today, he's the first.
Then we should have a few comments from some of the ones we've shipped very soon.
I WANT TO SEND MINE IN ASAP
Please be patient here, we will be offering 3 tier approach to installation services.
Tier 1 - Standard install services slotted into the normal workflow of our headlight building services. Cost ranges from $250-450 for work.
Tier 2 - Expedited/Scheduled install services. This will include Tier 1 pricing structure but will have a $150 scheduling priority fee - we will schedule a date and after 5pm, our installer will put your order as high priority completing it in the evening with no distractions. This will basically be like a 24/48 hour turn around vs up to 3 weeks with Tier 1 (estimated).
Tier 3 - Custom - encompassing many options like custom painting, lens etching, projector improvements, dual projector installation, angel eyes, DRL/Sequential LED strips, etc. All options we currently do for other cars (we'll show you options at a later date once we get closer.
IMPORTANT MILESTONE LINKS WITHIN THE MAIN THREAD
A) First prototype revealed
B) Zen6 prototype officially received
C) Zen6 prototype official tested
D) Zen6 production line photos released
E) Zen6 production packaging and first actual product
F) Zen6 production samples shown
G) Zen6 production begins transit
H) Zen6 first 16 unit pairs arrive.
I) Zen 6 first official install photos
*this is the last week for $299.99 price.
Currently there are 15 pre-orders on this list comprised of 3 actual kickstarter backers and 12 pre-paid pre-orders.
In order for this to be successful, we need your help!
Originally Posted by kickstarter campaign
New headlight assemblies original cost was $975-1200 per side. C6 replacement lenses ranged from $250-499 per pair. We're seeking to build about 500 units that we will pre-sell at $250 per set in single unit quantities to the kickstarter backers and sell at $450 per set with full production. We need some help. To get this product on the road, we only need .2% of total vehicle production. That's right, not even 1% of total vehicles on the road are required to get this project off the ground. We know we can do it!
1) Kickstarter
2) Umnitza.com Site
3) Through C6Performance Site
4) Or by Calling us 877 486 6489
Happy to be on board
PS: We're not yet listed as a vendor but have already signed the contract with the forum owners to be listed as one. Please contact IB for details thanks
PPS: read through the bio on Kickstarter
======
SUMMARY*
COMMENTS ABOUT OUR PRODUCT/SERVICE
We think our product and services speak for themselves and we want to make a case for it here. Buy your lenses here
- A) We promised you a product and we are delivering it. We have shown you real products, real manufacturing, real packaging, and real shipping. We are not selling you vaporware.
- B) You have purchased or will purchase a clean, highly professional, OE looking product, with minimal fuss or extra branding on the lenses
- C) You are working with a company that is capable of doing a soup to nuts approach
- D) We have a professional web site, where you can select options that work for you.
- E) We have been doing professional lighting since 2001, and will be around to help you as time rolls forward - along with our partners.
- F) We offer a great price. It will go up, but it will still be less than anywhere else.
- G) We built the mold to handle 5000+ units, so don't worry if you don't get into this batch coming, the next one is right around the corner, and the next one, etc.
We will always err on the side of too much communication vs no communication.
Details
Do you have any emergency units left?
The initial batch of 16 sets of lenses are making their way into the hands of their pre-order buyers from September and October. The short answer is no, all the 16 units are in usage.
So if you are in November, December, January, etc. your lenses will ship on or around April 7th-10th, this may be delayed due to some customs issues as usual, but we have already pre-cleared the shipments and have a telex release done.
DOT
There are some positive DOT developments with a local DOT certification lab in our area. We will have those posted when ready. But suffice it to say, we're going to have some info for those of you worried about Canadian DOT/US DOT.
Who is the lucky one?
The lenses we did received have been shipped out, so you should start seeing some reviews shortly, especially from John T who just received his today, he's the first.
Then we should have a few comments from some of the ones we've shipped very soon.
I WANT TO SEND MINE IN ASAP
Please be patient here, we will be offering 3 tier approach to installation services.
Tier 1 - Standard install services slotted into the normal workflow of our headlight building services. Cost ranges from $250-450 for work.
Tier 2 - Expedited/Scheduled install services. This will include Tier 1 pricing structure but will have a $150 scheduling priority fee - we will schedule a date and after 5pm, our installer will put your order as high priority completing it in the evening with no distractions. This will basically be like a 24/48 hour turn around vs up to 3 weeks with Tier 1 (estimated).
Tier 3 - Custom - encompassing many options like custom painting, lens etching, projector improvements, dual projector installation, angel eyes, DRL/Sequential LED strips, etc. All options we currently do for other cars (we'll show you options at a later date once we get closer.
IMPORTANT MILESTONE LINKS WITHIN THE MAIN THREAD
A) First prototype revealed
B) Zen6 prototype officially received
C) Zen6 prototype official tested
D) Zen6 production line photos released
E) Zen6 production packaging and first actual product
F) Zen6 production samples shown
G) Zen6 production begins transit
H) Zen6 first 16 unit pairs arrive.
I) Zen 6 first official install photos
*this is the last week for $299.99 price.
Last edited by info@umnitza.com; 03-21-2017 at 07:11 PM.
10-25-2016, 02:00 PM
#2
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,653
Received 328 Likes
on
262 Posts
We offer halos - we believe to be the brightest and best in the world
https://www.umnitza.com/orion-v2-led...2005-2013.html
We offer Carbon Fiber inserts - though often out of stock, we can offer a group buy to forum members if enough are interested as part of this service:
https://www.umnitza.com/cfwerks-c6-c...ht-insert.html
We offer new seals (when you do it in house with us).
And we'll offer all those doing this job 2 price levels that are a little bit better than usual as part of this production - as you know Corvette's come with 2 different types of sealant - one that takes 1 hour to open and one that takes 3+
10-28-2016, 12:56 PM
#3
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,653
Received 328 Likes
on
262 Posts
Update 10/28/2017
Due to SEMA please allow a little time to reply.
--
We have 10 "official" backers on Kickstarter.
We have 16 committed backers through C6Performance
We have 4 formal full price deposits on our site.
We are continuing to work with vendors and won't be disclosing actual numbers of those yet.
We have a rapid prototype being completed end of next week as a preliminary "something to show you" and then we'll do some final mock ups and do a finished rapid prototype.
Things are rolling along!
Due to SEMA please allow a little time to reply.
--
We have 10 "official" backers on Kickstarter.
We have 16 committed backers through C6Performance
We have 4 formal full price deposits on our site.
We are continuing to work with vendors and won't be disclosing actual numbers of those yet.
We have a rapid prototype being completed end of next week as a preliminary "something to show you" and then we'll do some final mock ups and do a finished rapid prototype.
Things are rolling along!
11-02-2016, 01:44 PM
#4
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,653
Received 328 Likes
on
262 Posts
@naldinator - you don't have to pony it up, you can go to kickstarter and it holds the money in escrow
12 Kickstarter backers
1 more direct order
RP#1 should be ready next week - a little delay due to SEMA
This is just ours, our partner has more of course. Keeping you in the loop
12 Kickstarter backers
1 more direct order
RP#1 should be ready next week - a little delay due to SEMA
This is just ours, our partner has more of course. Keeping you in the loop
The following users liked this post:
vcheng (11-17-2016)
12-09-2016, 07:41 PM
#6
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,653
Received 328 Likes
on
262 Posts
The prototype has finally been completed.
It's much better than we expected. We've got a scheduled test fit next Wednesday/Thursday.
Some comments about the current prototype, they are going to be called "Zen6 Lenses" to differentiate these from anything made by anyone else. They will mimic but not duplicate the factory ones and they will likely have very small etched branding in the corner - we haven't yet decided exactly where but we want to keep it relatively unobtrusive unless you specifically look for it. We though we were going to get only 1 side, but we got a pleasant surprise
Once we make final approval on the lenses, we expect 30-45 day production and ready to ship Mid January.
We currently have 35 pre-ordered, 13 KS backers that have their names in there, and 2 pending commitments for 10 lenses + 1 commitment for more from another vendor.
All pre-orders from now moving forward will have 1 of 2 options before final production.
Option 1:
$100 Deposit to either C6performance or Umnitza. $100 deposit is non-refundable but guarantees you a full year at the current price of $250. You don't have to buy immediately once we get them, but you will be given 1 full year from date of deposit to decide to go ahead and buy them or not. You will however not be given priority on the first batch as compared to those that put the full deposit down.
Option 2
$250 Pre-Order to either C6performance or Umnitza. $250 entitles you to be first in line for the first batch of units arriving.
--
Shipping is extra - though inexpensive
30 Day Refund from date of receipt, not date of purchase if you are not satisfied with the quality of the product upon receipt.
And finally, some photos:
SURPRISE
It's much better than we expected. We've got a scheduled test fit next Wednesday/Thursday.
Some comments about the current prototype, they are going to be called "Zen6 Lenses" to differentiate these from anything made by anyone else. They will mimic but not duplicate the factory ones and they will likely have very small etched branding in the corner - we haven't yet decided exactly where but we want to keep it relatively unobtrusive unless you specifically look for it. We though we were going to get only 1 side, but we got a pleasant surprise
Once we make final approval on the lenses, we expect 30-45 day production and ready to ship Mid January.
We currently have 35 pre-ordered, 13 KS backers that have their names in there, and 2 pending commitments for 10 lenses + 1 commitment for more from another vendor.
All pre-orders from now moving forward will have 1 of 2 options before final production.
Option 1:
$100 Deposit to either C6performance or Umnitza. $100 deposit is non-refundable but guarantees you a full year at the current price of $250. You don't have to buy immediately once we get them, but you will be given 1 full year from date of deposit to decide to go ahead and buy them or not. You will however not be given priority on the first batch as compared to those that put the full deposit down.
Option 2
$250 Pre-Order to either C6performance or Umnitza. $250 entitles you to be first in line for the first batch of units arriving.
--
Shipping is extra - though inexpensive
30 Day Refund from date of receipt, not date of purchase if you are not satisfied with the quality of the product upon receipt.
And finally, some photos:
SURPRISE
12-14-2016, 10:01 PM
#7
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,653
Received 328 Likes
on
262 Posts
Some minor updates.
We have received the prototypes, and judging by the detailed comparison, they are virtually indistinguishable except for the GM/DOT related markings from the originals...see photos.
The last photo is particularly interesting because the small "line" will be preserved that is similar to the original lenses. However, we're still exploring how to add a feature that we would like to see in these.
We just spoke to the factory and they said that the prototypes are finished and input directly into the CAD, there will be no further delay of sending the prototypes back for production unless we add those features we want. Once we test fit (one of the next 5 days depending on our tester's availability) we will post pictures.
The prototype does not have any UV coating on it (internal or external) so while some of you may pressure us into selling it to you (it is after all a $1700 prototype) we will not do so because it will yellow and fade within 1 year of use.
Finally, if ANYONE is in the bay area and wants to validate that we're not just blowing smoke up anyone's butt, come on over and see them for yourselves...
We have received the prototypes, and judging by the detailed comparison, they are virtually indistinguishable except for the GM/DOT related markings from the originals...see photos.
The last photo is particularly interesting because the small "line" will be preserved that is similar to the original lenses. However, we're still exploring how to add a feature that we would like to see in these.
We just spoke to the factory and they said that the prototypes are finished and input directly into the CAD, there will be no further delay of sending the prototypes back for production unless we add those features we want. Once we test fit (one of the next 5 days depending on our tester's availability) we will post pictures.
The prototype does not have any UV coating on it (internal or external) so while some of you may pressure us into selling it to you (it is after all a $1700 prototype) we will not do so because it will yellow and fade within 1 year of use.
Finally, if ANYONE is in the bay area and wants to validate that we're not just blowing smoke up anyone's butt, come on over and see them for yourselves...
01-03-2017, 08:43 PM
#8
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,653
Received 328 Likes
on
262 Posts
There is a slight delay as a key member of the team was out of commission last week so delayed the process by a week. Given Chinese New Year delays, we expect production to complete mid to late January or early February. Fingers cross but we will complete this.
Here is the pre-final test fitment of the lenses. While the photos aren't big (our fault) they give you the details you need.
1) The inner trim pieces lock in exactly where they should
2) All the "divets" and crevices are exactly like the OEM units
3) Acrylic is hyper polished.
We really would like to take this time to encourage those of you on the fence to jump in...or on the diving board to dive in.
The reality is, there are always ways to expedite delivery and with more orders, we will have the opportunity to possibly pay an expedite fee that would speed things up.
Here is the pre-final test fitment of the lenses. While the photos aren't big (our fault) they give you the details you need.
1) The inner trim pieces lock in exactly where they should
2) All the "divets" and crevices are exactly like the OEM units
3) Acrylic is hyper polished.
We really would like to take this time to encourage those of you on the fence to jump in...or on the diving board to dive in.
The reality is, there are always ways to expedite delivery and with more orders, we will have the opportunity to possibly pay an expedite fee that would speed things up.
01-05-2017, 12:45 PM
#9
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,653
Received 328 Likes
on
262 Posts
I have good news and a little bad news. But I'll keep you guys posted because I don't want to give away too much - because a LOT of people are watching this.
We've been negotiating with the mold factory pretty much all week, since the timezone is quite different, it's challenging.
So here are some concessions we've had them make.
1) Initially, we wanted them to make 50 unit pairs immediately to fill the immediate pre-orders
Given the high demand and rising rate of pre-orders, this is no longer feasible as it will not fill the pre-orders, so we've had to expand the initial order size
2) Initially, we aimed for end of December, which then moved to end of January, that is no longer possible. Took 2 full weeks to get the final terms figured out and we're 99% of the way there, we should be done by Monday with that - a deposit has already been paid, so we're on our way.
3 factors are contributing,
So given all the details, here is the date we've been given.
February 25th. We will have well over the current demand available but...see below.
The lenses will be sent in properly sized and padded boxes
---
We have the ability to pay an expedite fee on Jan 20th, that expedite fee MAY save us a full week and a half. Please continue to do your pre-orders at the $250 price point. On Jan 20th, that price point will be $300.
We've been negotiating with the mold factory pretty much all week, since the timezone is quite different, it's challenging.
So here are some concessions we've had them make.
1) Initially, we wanted them to make 50 unit pairs immediately to fill the immediate pre-orders
Given the high demand and rising rate of pre-orders, this is no longer feasible as it will not fill the pre-orders, so we've had to expand the initial order size
2) Initially, we aimed for end of December, which then moved to end of January, that is no longer possible. Took 2 full weeks to get the final terms figured out and we're 99% of the way there, we should be done by Monday with that - a deposit has already been paid, so we're on our way.
3 factors are contributing,
- Chinese New Year (yes, being made in China, like your iPhone and many other complex parts) will delay the production by 2 weeks
- See #1, WE'RE UPPING PRODUCTION FOR THE INITIAL BATCH DUE TO DEMAND
- Delay in negotiating terms and details -
So given all the details, here is the date we've been given.
February 25th. We will have well over the current demand available but...see below.
The lenses will be sent in properly sized and padded boxes
---
We have the ability to pay an expedite fee on Jan 20th, that expedite fee MAY save us a full week and a half. Please continue to do your pre-orders at the $250 price point. On Jan 20th, that price point will be $300.
01-12-2017, 07:35 PM
#10
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,653
Received 328 Likes
on
262 Posts
A LOT, and by a LOT, I mean a LOT are asking about the service for us to remove your headlight lenses and install the covers, which will involve:
a) you shipping us the headlights and we do the work
b) you driving to us and we do the work
c) you going to one of our authorized reseller/installers and doing the work
As we start to line people up around the country, preference will be given to folks in the following way:
1) Those who ordered first will be given first labor option (meaning if you pre-ordered in November when we announced, you will be the first one we work on even if someone who ordered in January sends his lights in 1 day before you).
2) Next will be those that have simplified installs - just covers, or just covers, clear film, and new gaskets (self-provided for now). The more complex installs like - angel eyes, led strips, projector clear lenses, etc. will be scheduled out for time.
3) Finally, groups (for example, we were contacted by a dealer who wants to send us 10 sets of lights so we can do ALL of them at once).
One final note, please remember, some headlight seals take longer than others, historically we have charged $250 for the easier to open lights and $350 for the harder to open lights.
----
OH, yeah, keep the pre-orders coming, remember, once we reach 100 pre-orders and we're awfully close, the price will go up.
a) you shipping us the headlights and we do the work
b) you driving to us and we do the work
c) you going to one of our authorized reseller/installers and doing the work
As we start to line people up around the country, preference will be given to folks in the following way:
1) Those who ordered first will be given first labor option (meaning if you pre-ordered in November when we announced, you will be the first one we work on even if someone who ordered in January sends his lights in 1 day before you).
2) Next will be those that have simplified installs - just covers, or just covers, clear film, and new gaskets (self-provided for now). The more complex installs like - angel eyes, led strips, projector clear lenses, etc. will be scheduled out for time.
3) Finally, groups (for example, we were contacted by a dealer who wants to send us 10 sets of lights so we can do ALL of them at once).
One final note, please remember, some headlight seals take longer than others, historically we have charged $250 for the easier to open lights and $350 for the harder to open lights.
----
OH, yeah, keep the pre-orders coming, remember, once we reach 100 pre-orders and we're awfully close, the price will go up.
01-20-2017, 03:35 PM
#11
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,653
Received 328 Likes
on
262 Posts
There is the difference between our lenses and any other lenses being produced. We won't make any veiled references to either lenses, you decide which one works for you best and what price works for you. I can assure you all that we will have a great quality product.
Couple of important updates
1) We are working on DOT approval with the factory
2) We have over 85 pre-orders, if you have not submitted your order yet, please consider it.
3) February 25th is still looking strong but there is going to be "dead" time from tomorrow through Feb 4th, so other than us doing some more light testing and fitting, we will be going "dark" except for the occasional bump of a thread to entice more people to join in.
As mentioned elsewhere, we have been doing headlights for over 17 years now, one of the first innovators of customized headlight production ever. Being a trend setter hasn't always been easy, but it's been fun.
And to borrow a silly slogan,
"We will make your Corvette Headlights great again"
Couple of important updates
1) We are working on DOT approval with the factory
2) We have over 85 pre-orders, if you have not submitted your order yet, please consider it.
3) February 25th is still looking strong but there is going to be "dead" time from tomorrow through Feb 4th, so other than us doing some more light testing and fitting, we will be going "dark" except for the occasional bump of a thread to entice more people to join in.
As mentioned elsewhere, we have been doing headlights for over 17 years now, one of the first innovators of customized headlight production ever. Being a trend setter hasn't always been easy, but it's been fun.
And to borrow a silly slogan,
"We will make your Corvette Headlights great again"
02-10-2017, 04:48 PM
#12
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,653
Received 328 Likes
on
262 Posts
Production on the injection mold has begun. Some details were cropped out to avoid divulging too much.
Preliminary mold photo
2 Photos of a tech working on finalizing it
The injection machine from two different angles that will be doing the work for this.
Preliminary mold photo
2 Photos of a tech working on finalizing it
The injection machine from two different angles that will be doing the work for this.
03-14-2017, 03:17 PM
#15
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,653
Received 328 Likes
on
262 Posts
UPDATE 3/14/17
The first 16 lenses have arrived, for now, here are the preliminary photos of the parts installed either later today or early tomorrow. We have two local headlights that we're installing but nothing that we can install on a car until a customer brings the car we have planned late next week.
What happens next
We are shipping the first 12 sets, 2 local installs, and keeping 2 units here for the 2 cars we had planned to install.
Who is lucky to get the first sets?
In order of who paid first:
Mike H. - confirmed
Bryan S. - confirmed
Bryan A K. - confirmed
Adam R. - not yet called
Lars A - not yet called
Douglas S - not yet called
Michele M - not yet called
Ralph C - not yet called
Michel P - not yet called
Adam S. - Local Customer for Install
Rich J. - not yet called
Kasey S. - not yet called.
Kevin S. - not yet called
When are the rest coming?
As a reminder, the parts will be arriving in the Port of Oakland by hopefully end of this month or worst case 1 week into April. There are plenty to go around as we have already scheduled ANOTHER shipment due to demand to leave April 2nd.
We will be making labels only when the parts have landed.
When will I get a set if I buy today?
This is very important
We have a lot of units coming on the vessel shipment. But, we also have a lot of pre-orders. If you are one of the next roughly 30-50 people to order, you will likely receive it on this shipment.
If you buy today, your price will be $299.99 per pair of lenses. Starting Monday 20th, due to pressure from our vendors/wholesalers, will have to raise prices to $349.99 and that is likely the final price.
If you are international, you will be shipped by the method you have chosen. We really look forward to some posts soon!!!
Anyways, here are the photos of the parts that just landed:
The first 16 lenses have arrived, for now, here are the preliminary photos of the parts installed either later today or early tomorrow. We have two local headlights that we're installing but nothing that we can install on a car until a customer brings the car we have planned late next week.
What happens next
We are shipping the first 12 sets, 2 local installs, and keeping 2 units here for the 2 cars we had planned to install.
Who is lucky to get the first sets?
In order of who paid first:
Mike H. - confirmed
Bryan S. - confirmed
Bryan A K. - confirmed
Adam R. - not yet called
Lars A - not yet called
Douglas S - not yet called
Michele M - not yet called
Ralph C - not yet called
Michel P - not yet called
Adam S. - Local Customer for Install
Rich J. - not yet called
Kasey S. - not yet called.
Kevin S. - not yet called
When are the rest coming?
As a reminder, the parts will be arriving in the Port of Oakland by hopefully end of this month or worst case 1 week into April. There are plenty to go around as we have already scheduled ANOTHER shipment due to demand to leave April 2nd.
We will be making labels only when the parts have landed.
When will I get a set if I buy today?
This is very important
We have a lot of units coming on the vessel shipment. But, we also have a lot of pre-orders. If you are one of the next roughly 30-50 people to order, you will likely receive it on this shipment.
If you buy today, your price will be $299.99 per pair of lenses. Starting Monday 20th, due to pressure from our vendors/wholesalers, will have to raise prices to $349.99 and that is likely the final price.
If you are international, you will be shipped by the method you have chosen. We really look forward to some posts soon!!!
Anyways, here are the photos of the parts that just landed:
03-14-2017, 08:44 PM
#16
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,653
Received 328 Likes
on
262 Posts
Apologies for the spamming of this thread today. We have completed our test fitting on John T's C6 Corvette headlights with our Zen6 Lenses.
Without the final seal, all the parts fit and line up perfectly. Of course you all know the dramatic change in appearance is unbelievable.
Any questions, now is the time to ask.
Ok, enough words, let's let the pictures do the talking. Our favorite is the last photo, where you can actually make out the Zen6 logo on the lenses
Without the final seal, all the parts fit and line up perfectly. Of course you all know the dramatic change in appearance is unbelievable.
Any questions, now is the time to ask.
Ok, enough words, let's let the pictures do the talking. Our favorite is the last photo, where you can actually make out the Zen6 logo on the lenses
Last edited by info@umnitza.com; 03-14-2017 at 08:47 PM.
03-21-2017, 07:12 PM
#17
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,653
Received 328 Likes
on
262 Posts
SUMMARY*
COMMENTS ABOUT OUR PRODUCT/SERVICE
We think our product and services speak for themselves and we want to make a case for it here. Buy your lenses here
We will always err on the side of too much communication vs no communication.
Details
Do you have any emergency units left?
The initial batch of 16 sets of lenses are making their way into the hands of their pre-order buyers from September and October. The short answer is no, all the 16 units are in usage.
So if you are in November, December, January, etc. your lenses will ship on or around April 7th-10th, this may be delayed due to some customs issues as usual, but we have already pre-cleared the shipments and have a telex release done.
DOT
There are some positive DOT developments with a local DOT certification lab in our area. We will have those posted when ready. But suffice it to say, we're going to have some info for those of you worried about Canadian DOT/US DOT.
Who is the lucky one?
The lenses we did received have been shipped out, so you should start seeing some reviews shortly, especially from John T who just received his today, he's the first.
Then we should have a few comments from some of the ones we've shipped very soon.
I WANT TO SEND MINE IN ASAP
Please be patient here, we will be offering 3 tier approach to installation services.
Tier 1 - Standard install services slotted into the normal workflow of our headlight building services. Cost ranges from $250-450 for work.
Tier 2 - Expedited/Scheduled install services. This will include Tier 1 pricing structure but will have a $150 scheduling priority fee - we will schedule a date and after 5pm, our installer will put your order as high priority completing it in the evening with no distractions. This will basically be like a 24/48 hour turn around vs up to 3 weeks with Tier 1 (estimated).
Tier 3 - Custom - encompassing many options like custom painting, lens etching, projector improvements, dual projector installation, angel eyes, DRL/Sequential LED strips, etc. All options we currently do for other cars (we'll show you options at a later date once we get closer.
IMPORTANT MILESTONE LINKS WITHIN THE MAIN THREAD
A) First prototype revealed
B) Zen6 prototype officially received
C) Zen6 prototype official tested
D) Zen6 production line photos released
E) Zen6 production packaging and first actual product
F) Zen6 production samples shown
G) Zen6 production begins transit
H) Zen6 first 16 unit pairs arrive.
I) Zen 6 first official install photos
*this is the last week for $299.99 price.
COMMENTS ABOUT OUR PRODUCT/SERVICE
We think our product and services speak for themselves and we want to make a case for it here. Buy your lenses here
- A) We promised you a product and we are delivering it. We have shown you real products, real manufacturing, real packaging, and real shipping. We are not selling you vaporware.
- B) You have purchased or will purchase a clean, highly professional, OE looking product, with minimal fuss or extra branding on the lenses
- C) You are working with a company that is capable of doing a soup to nuts approach
- D) We have a professional web site, where you can select options that work for you.
- E) We have been doing professional lighting since 2001, and will be around to help you as time rolls forward - along with our partners.
- F) We offer a great price. It will go up, but it will still be less than anywhere else.
- G) We built the mold to handle 5000+ units, so don't worry if you don't get into this batch coming, the next one is right around the corner, and the next one, etc.
We will always err on the side of too much communication vs no communication.
Details
Do you have any emergency units left?
The initial batch of 16 sets of lenses are making their way into the hands of their pre-order buyers from September and October. The short answer is no, all the 16 units are in usage.
So if you are in November, December, January, etc. your lenses will ship on or around April 7th-10th, this may be delayed due to some customs issues as usual, but we have already pre-cleared the shipments and have a telex release done.
DOT
There are some positive DOT developments with a local DOT certification lab in our area. We will have those posted when ready. But suffice it to say, we're going to have some info for those of you worried about Canadian DOT/US DOT.
Who is the lucky one?
The lenses we did received have been shipped out, so you should start seeing some reviews shortly, especially from John T who just received his today, he's the first.
Then we should have a few comments from some of the ones we've shipped very soon.
I WANT TO SEND MINE IN ASAP
Please be patient here, we will be offering 3 tier approach to installation services.
Tier 1 - Standard install services slotted into the normal workflow of our headlight building services. Cost ranges from $250-450 for work.
Tier 2 - Expedited/Scheduled install services. This will include Tier 1 pricing structure but will have a $150 scheduling priority fee - we will schedule a date and after 5pm, our installer will put your order as high priority completing it in the evening with no distractions. This will basically be like a 24/48 hour turn around vs up to 3 weeks with Tier 1 (estimated).
Tier 3 - Custom - encompassing many options like custom painting, lens etching, projector improvements, dual projector installation, angel eyes, DRL/Sequential LED strips, etc. All options we currently do for other cars (we'll show you options at a later date once we get closer.
IMPORTANT MILESTONE LINKS WITHIN THE MAIN THREAD
A) First prototype revealed
B) Zen6 prototype officially received
C) Zen6 prototype official tested
D) Zen6 production line photos released
E) Zen6 production packaging and first actual product
F) Zen6 production samples shown
G) Zen6 production begins transit
H) Zen6 first 16 unit pairs arrive.
I) Zen 6 first official install photos
*this is the last week for $299.99 price.
03-23-2017, 12:37 PM
#18
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,653
Received 328 Likes
on
262 Posts
these are the first photos of the lenses installed on JT's car:
https://www.corvetteforum.com/forums...post1594360908
More photos coming next week.
https://www.corvetteforum.com/forums...post1594360908
More photos coming next week.
04-08-2017, 02:12 PM
#19
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,653
Received 328 Likes
on
262 Posts
We got an email last night from the customs/transit broker!
Container landed 1:36pm yesterday
Container unloaded destination 4:36pm yesterday
Container unloaded/discharged 9:51pm yesterday
Predicted Inbound Terminal for Delivery to Consignee (that's us) predicted for this morning.
Expected delivery to us by Monday-Wednesday pending paperwork
Container landed 1:36pm yesterday
Container unloaded destination 4:36pm yesterday
Container unloaded/discharged 9:51pm yesterday
Predicted Inbound Terminal for Delivery to Consignee (that's us) predicted for this morning.
Expected delivery to us by Monday-Wednesday pending paperwork
04-10-2017, 01:39 PM
#20
Supporting Vendor
Thread Starter
Member Since: Sep 2016
Location: NorCal CA 877 486 6489
Posts: 3,653
Received 328 Likes
on
262 Posts
As we get closer, it's probably a good idea for us to create a new thread with these details about installation services, here's what we've been emailing and PM'ing folks with. We offer a full service headlight retrofit in addition to the "basics" of remove and replace. It's not for everyone, but the medley of options below will allow you to do an a la carte style selection
Install Services for Corvette Lenses
Lens Replacement - (check perimeter of your lenses)
Most cars have a single low beam projector, but wouldn't it be nice to have a second projector that adds light output to the main projector without blinding oncoming traffic? The dual projector retrofit gives your car a more modern look, with better light output and visibility while still maintaining the high beam flash to pass and lock out capability.
Scheduled Expedite Service
Please be patient here, we will be offering 3 tier approach to installation services.
Will post a photo later in the week (with the new thread) regarding what each of these options looks like if you are unsure.
Install Services for Corvette Lenses
Lens Replacement - (check perimeter of your lenses)
- $350 remove and replace black sealant
- $250 remove and replace grey sealant
- $150 remove lenses from headlights only (mostly for local customers who wish to do their own work but are afraid of the oven)
- Tier 1 - standard black out (satin, matte, flat, or gloss) - $75
- Tier 2 - custom factory black or other color with clear coat from paint show - $175-225 (depends on paint, some paints are more expensive than others).
- $0 - no additional charge with Lens replacement for Our Orion V2/V4/Lite - Lifetime/Lifetime/1 Year Warranty
- $50-100 additional - Customer Provided Angel Eyes Rings
- $XXX - uncertain at this time while we test several LED strip options
- $0 - no additional charge for our brand D1S Low beam (Osram/Philips/Generic) or LED high beam Luxen or LED Luxen turn signal switchbacks
- $20 - customer provided bulbs
Most cars have a single low beam projector, but wouldn't it be nice to have a second projector that adds light output to the main projector without blinding oncoming traffic? The dual projector retrofit gives your car a more modern look, with better light output and visibility while still maintaining the high beam flash to pass and lock out capability.
- $150-250 - Depends on parts options using Umnitza parts (Bosch H1 Mini Projectors, LED/HID Bulbs/Ballasts, custom fitting, wiring, etc.)
- $XXX - Depends on customer provide parts
- $50 - Single Color (red/orange/blue/etc)
- $200 - RGB with wifi controller
- $35 - Customer Supplied Demon Eyes Labor Only
Scheduled Expedite Service
Please be patient here, we will be offering 3 tier approach to installation services.
- Tier 1 - Standard install services slotted into the normal workflow of our headlight building services. Detailed Above
- Tier 2 - Expedited/Scheduled install services. This will include Tier 1 pricing structure but will have a $150 scheduling priority fee - we will schedule a date and after 5pm, our installer will put your order as high priority completing it in the evening with no distractions. This will basically be like a 24/48 hour turn around vs up to 3 weeks with Tier 1 (estimated).
- Tier 3 - Custom - encompassing many options like custom painting, lens etching, projector improvements, dual projector installation, angel eyes, DRL/Sequential LED strips, etc. All options we currently do for other cars (we'll show you options at a later date once we get closer.
Will post a photo later in the week (with the new thread) regarding what each of these options looks like if you are unsure.