sbrooks64

Darril Easlick. 2007 22k. Got it 13 March 2015.

Scott Flenniken

Robert (Bob) Trommater, 2009

bluekey28

Bryan Briones - 2013.

McCall38

J.D.Dickinson built the LS7 in my Black 2011 Z06.

ch2me

Will Love built mine, you're not alone!

JDNZ06

Mike Armstrong built mine just checked the plate today. I bought it last week, 2009 Cyber Gray Z06 3LT. 23000 miles. runs very strong. Oh and im new to the forum and let the mods begin on another project

SHM

Might want to have the cylinder heads checked out first before doing any mods. There seems to be issues with their machining. Particularly with heads made before 2010.

JDNZ06

Yes sir, I've been doing some reading on the valve guide issues and I plan on checking them out.

SHM

I've decided to keep mine stock. I still have a major amount of the PT warranty left and with the head situation being what it is, I'm just going to pile a lot of mileage on the car and try not to worry too much about it. And if the engine blows, GM will give me a new one on their dime. Hopefully, I'll be able to tell if something is amiss before any catastrophic event happens....I hope....

LEOSVETTE

Tom Morrissey
06 With 36000 miles running Strong

SpartaGus

[I]2011 Z06 Carbon Edition #207 with 8100 miles
Built by Ron Hein

SHM

I've heard at one point, there were about 75 engine builders. I believe they also built the LS9s, too.

Rynoinspect87

this is so awesome. I new the ls7 was hand assembled but i didnt know they put a little build plate on the motor. SWEET! ill go home and check mine and post who did the build. Great post!

Rynoinspect87

I believe they also build the ls3 in the grandsport as well but i could be mistaken.

Krink1

2013 Yellow 427 1SC with 956 miles and the engine was built by Chas E. Giese Jr.

eaglei

Yes we hand built many LS3 dry sump engines for GS! But we did not build for convertibles or automatics. Still it was a big part of our business for several years. And there is a thread on Corvette Forum for engines built by our gang at Wixom PBC. Look for "Who built your dry sump LS3". and you will find quite a few posted.

Here's to Corvette owners everywhere!

Wonder if there are any in New Guniea...

t32bt32b

My LS7 was purchased as a crate motor in 2006 (I believe). But it has a Robert Trommater on it. It's in an Ultima GTR and is not required to use catalytic converters. It runs quite nicely.
T

BigVette427

2011 Z06 built in 08/10

LS7 built by Ron Hein

MechE13

T. N. Taylor built mine, 2008 model Atomic Orange. Runs like a beast!

t4dollars

Its been a good motor