[Z06] Katech Stage 2 Z06 SN#88
#1
Premium Supporting Vendor
Thread Starter
Katech Stage 2 Z06 SN#88
My usual photo spot is occupied with some construction in the car shop, so this photo near the hoist will have to do.
Stage 2 package with K501 cam
Bronze valve guides
Ti/Mo intake/exhaust valves
MSD intake painted satin black
Halltech MF103
Nick Williams 102mm throttle body
ATI damper
Dewitts radiator
ARE Stage 3 dry sump system
Spintric air oil separator
LS9X clutch
Katech HD clutch hydraulics
RPM trans
Moton Clubsport double adjustable coil-overs
LG monoball kit
Stage 2 package with K501 cam
Bronze valve guides
Ti/Mo intake/exhaust valves
MSD intake painted satin black
Halltech MF103
Nick Williams 102mm throttle body
ATI damper
Dewitts radiator
ARE Stage 3 dry sump system
Spintric air oil separator
LS9X clutch
Katech HD clutch hydraulics
RPM trans
Moton Clubsport double adjustable coil-overs
LG monoball kit
The following users liked this post:
The Highlander (11-12-2015)
#4
I see headers in the last pic....customer supplied/installed previously I bet.
#6
Melting Slicks
#7
Premium Supporting Vendor
Thread Starter
#8
Le Mans Master
Amazing builds you post - mild usually but done right. One thing I noticed is the continuous use of bronze guides..........I guess they are not so bad after all
#11
Premium Supporting Vendor
Thread Starter
#14
Premium Supporting Vendor
Thread Starter
I have documentation showing the car was being exported to Canada. As you can see there is no license plate on the vehicle in our shop.
#15
Cruising is the passion!
Member Since: Jan 2003
Location: SIMSBURY CT
Posts: 6,140
Received 304 Likes
on
213 Posts
St. Jude Donor '07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-'20-'21-'22-'23-'24
No doubt that Katech and the owner handled this properly.
Last edited by CTYANK2; 06-04-2018 at 04:58 PM.