Oh snap an LS7 making 900rw from Dasilva Motorsports
#1
Former Vendor
Thread Starter
Member Since: Jun 2012
Location: Breslau Ontario
Posts: 1,511
Likes: 0
Received 0 Likes
on
0 Posts
Oh snap an LS7 making 900rw from Dasilva Motorsports
No folks that's not a typo 900+ RWHP from a 2010 Z06 with an LS7 .
We did this build from scratch , not bolts on
Fully forged LS7 , Our Dasilva Motorsports heads & custom cam , stage 2 fuel from A&A , a little V7 YSi pumping out 16psi a flip drive , LS9 ZR1 clutch , tick clutch master , some Alky Control meth .....scary is all we can say .
The Master blaster tuner Arun strikes again .
Thats to Josh from A&A for the help on this one
Here's a little vid , and I post up the graph tomorrow
If its Corvette Performance , Dasilva Motorsports is Leading Edge .
#2
No folks that's not a typo 900+ RWHP from a 2010 Z06 with an LS7 .
We did this build from scratch , not bolts on
Fully forged LS7 , Our Dasilva Motorsports heads & custom cam , stage 2 fuel from A&A , a little V7 YSi pumping out 16psi a flip drive , LS9 ZR1 clutch , tick clutch master , some Alky Control meth .....scary is all we can say .
The Master blaster tuner Arun strikes again .
Thats to Josh from A&A for the help on this one
Here's a little vid , and I post up the graph tomorrow
If its Corvette Performance , Dasilva Motorsports is Leading Edge .
#7
Administrator
Member Since: Aug 1999
Location: Chattanooga, TN
Posts: 63,725
Received 1,327 Likes
on
504 Posts
CI 2-3-4-5-6-7-8-9-10-11-12
Wounded Warrior Escort '11
St. Jude Donor '03 thru '24
NCM Lifetime Member
NCM Sinkhole Donor
If your posts are missing from this thread, you may benefit from reviewing these rules:
http://forums.corvetteforum.com/foru...le-thread.html
http://forums.corvetteforum.com/foru...hijacking.html
http://forums.corvetteforum.com/foru...rd-others.html
http://forums.corvetteforum.com/foru...le-thread.html
http://forums.corvetteforum.com/foru...hijacking.html
http://forums.corvetteforum.com/foru...rd-others.html
#11
Melting Slicks
People please note that Dasilva motorsports dyno runs are pulled with wheels mounted on the car.This is true rwhp and not axle h.p.There is a huge difference between the two.Also keep in mind that the higher the horepower figure is the bigger the gap will be between the two methods of measuring.MPH always tells the truth.There is no getting away from it.This corvette may very well break high eights and well over 150 mph in the right hands.Manny you re a genius.
#12
Former Vendor
Thread Starter
Member Since: Jun 2012
Location: Breslau Ontario
Posts: 1,511
Likes: 0
Received 0 Likes
on
0 Posts
People please note that Dasilva motorsports dyno runs are pulled with wheels mounted on the car.This is true rwhp and not axle h.p.There is a huge difference between the two.Also keep in mind that the higher the horepower figure is the bigger the gap will be between the two methods of measuring.MPH always tells the truth.There is no getting away from it.This corvette may very well break high eights and well over 150 mph in the right hands.Manny you re a genius.
#13
People please note that Dasilva motorsports dyno runs are pulled with wheels mounted on the car.This is true rwhp and not axle h.p.There is a huge difference between the two.Also keep in mind that the higher the horepower figure is the bigger the gap will be between the two methods of measuring.MPH always tells the truth.There is no getting away from it.This corvette may very well break high eights and well over 150 mph in the right hands.Manny you re a genius.
FWIW-my C5 ran as fast as 160 + mph with video's and timeslips to prove it. And it has never made any crazy horsepower claims-in fact I don't even care what it made.
Yet other shops post 1100 rwhp + dyno numbers and have never even come close to running 160-they won't post a timeslip or a video-if you can't post any of those then why bother making the claim.
And trust me-if we wanted more out of this car-we could of easily done it.
#14
Le Mans Master
Congrats Manny and Arun. Looks like an impressive build. I would be too chicken to drive that thing down 1\4 mile but that thing would be a blast on the highway. (In Mexico of course. )
#15
Melting Slicks
I d take it from samson to lachine in 5 minutes flat all out on the highway ,and Jody would have to come and get me out of jail.Come to think of it he d leave me there.Lol.
#16
Former Vendor
Thread Starter
Member Since: Jun 2012
Location: Breslau Ontario
Posts: 1,511
Likes: 0
Received 0 Likes
on
0 Posts
#17
Le Mans Master
#18
Melting Slicks
Hahahahaha nice one Jody .Lol.You see now we are one big happy family.I knew when spring came around that everyone would be on the same page.Right here in the canadian forum .