Napa rotors for a C6Z
#1
Racer
Thread Starter
Member Since: Dec 2009
Location: Long island NY
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Napa rotors for a C6Z
I want to purchase a set just as a back up to carry with me. Before I order does anyone know the part number on the fronts and rears for a C6Z?
Thanks
Thanks
#2
Tech Contributor
Member Since: Oct 1999
Location: Charlotte, NC (formerly Endicott, NY)
Posts: 40,096
Received 8,930 Likes
on
5,334 Posts
Your best bet would be to buy from either GM Parts House, Parts Taxi or GMPartsDirect. A few weeks ago GMPartsDirect had the lowest price but they typically hammer you with a higher shipping/handling fee which usually makes them higher cost than the others. The NAPA rotors (fronts only) are going to cost more even if you get a discount. I checked with my local NAPA where I used to get a great deal on the C5 rotors and they couldn't come close to the forum vendors prices for OEM rotors. The other places can also suppply you with rear rotors which NAPA doesn't sell yet. I usually take 2 of each to the track with me.
Bill
Bill
#5
Tech Contributor
Member Since: Oct 1999
Location: Charlotte, NC (formerly Endicott, NY)
Posts: 40,096
Received 8,930 Likes
on
5,334 Posts
I just checked their price. Its about the same. A few weeks ago I got 4 OEM rotors from Parts Taxi for $352. The rotors were $79.02 Vs $80.89 for Rock Auto. GM Parts Direct is selling them for about $10 less but you have the higher shipping and handling charges with them.
With HP+ and Cobalt CSR pads I am getting between 6 to 8 track days out of a stock rotor.
Bill
With HP+ and Cobalt CSR pads I am getting between 6 to 8 track days out of a stock rotor.
Bill
#6
Former Vendor
I just checked their price. Its about the same. A few weeks ago I got 4 OEM rotors from Parts Taxi for $352. The rotors were $79.02 Vs $80.89 for Rock Auto. GM Parts Direct is selling them for about $10 less but you have the higher shipping and handling charges with them.
With HP+ and Cobalt CSR pads I am getting between 6 to 8 track days out of a stock rotor.
Bill
With HP+ and Cobalt CSR pads I am getting between 6 to 8 track days out of a stock rotor.
Bill
Thanks for your purchase and referal. That is a great looking avatar pic.
Kevin
www.PartsTaxi.com