This dyno will blow your mind!#@$%^
07-28-2016, 12:25 PM
#1
Supporting Vendor
Thread Starter
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes
on
313 Posts
St. Jude Donor '09
This dyno will blow your mind!#@$%^
Tony's Corvette has been hearing good things about our intake for the C7 Z06, and just ordered 5 more.
I asked him how the dyno numbers turned out. His words verbatim:
I asked him how the dyno numbers turned out. His words verbatim:
Hi Jim
We put your cold air intake on with headers and got about 90 HP. I will put the next one on by itself and give you the results.
Thanks
Tony
Tony's Corvette Shop Inc 7500 Rickenbacker Drive Gaithersburg, Md 20879 301 987 0565 Office 301 987 8180 Fax
We put your cold air intake on with headers and got about 90 HP. I will put the next one on by itself and give you the results.
Thanks
Tony
Tony's Corvette Shop Inc 7500 Rickenbacker Drive Gaithersburg, Md 20879 301 987 0565 Office 301 987 8180 Fax
__________________
"World Class Performance for your Corvette"
Intake Design and Engineering since 1999
Halltech Systems, LLC
262-510-7600
For service email:
orders@halltechsystems.com
www.halltechsystems.com
"World Class Performance for your Corvette"
Intake Design and Engineering since 1999
Halltech Systems, LLC
262-510-7600
For service email:
orders@halltechsystems.com
www.halltechsystems.com
The following users liked this post:
Bad Dad (07-28-2016)
07-28-2016, 02:03 PM
#2
Race Director
Member Since: Oct 2004
Location: Cape Cod, Mass.
Posts: 18,777
Received 4,576 Likes
on
2,166 Posts
2023 C3 of the Year Finalist - Unmodified
2021 C8 of the Year Finalist Unmodified
2020 Corvette of the Year Finalist (performance mods)
2019 C1 of Year Winner (performance mods)
2017 Corvette of the Year Finalist
2016 C2 of Year
2015 C3 of Year Finalist
I'm sold on this intake. Certainly appears to be the low hanging fruit for horsepower 
Anyone doing installs at Carlisle?
Anyone doing installs at Carlisle?
07-28-2016, 02:13 PM
#3
Team Owner
Member Since: Oct 2013
Location: Kansas City, Missouri
Posts: 25,395
Received 7,770 Likes
on
4,193 Posts
CORVETTE TODAY Host
St. Jude Donor'15
Congrats Jim! I'm anxious to see the dyno with just the CAI by itself too.
07-28-2016, 09:41 PM
#8
I have heard the haltech does not fit good.is this true?any pics of the supposed bad fitment.
07-29-2016, 09:04 AM
#13
Drifting
I believe he said the 90hp was with the filter and headers. Still exceptional if true.
-Paul
-Paul
Last edited by Paul R; 07-29-2016 at 09:05 AM.
07-29-2016, 12:52 PM
#14
Team Owner
You heard this from someone who simply failed to get it installed all the way in place during the install. Once you recheck and make sure it is in place they fit great.
07-29-2016, 04:55 PM
#15
Team Owner
Freaked Ls3 has a A8 2015 with a Halltech and 2 inch AR Headers
teamed with a tune on a mustang dyno.
At the same tuner who does all my tunes. Wong's Performance Engineering. Stock was 530 rwhp
Halltech, headers and tune was 603. We have seen Callaway A8 do 605
rwhp. I would say the combo nets easy 90 hp.
You can you look up the dyno sheets by searching Freaked's post.
I called today to try to get my headers installed. I'm still waiting
with my Jethot coated ARH 2 inch waiting to go on.
teamed with a tune on a mustang dyno.
At the same tuner who does all my tunes. Wong's Performance Engineering. Stock was 530 rwhp
Halltech, headers and tune was 603. We have seen Callaway A8 do 605
rwhp. I would say the combo nets easy 90 hp.
You can you look up the dyno sheets by searching Freaked's post.
I called today to try to get my headers installed. I'm still waiting
with my Jethot coated ARH 2 inch waiting to go on.
07-29-2016, 05:14 PM
#16
It fits very snug tight and perfect. If it is installed it needs to be all the way down and in place.
You heard this from someone who simply failed to get it installed all the way in place during the install. Once you recheck and make sure it is in place they fit great.
You heard this from someone who simply failed to get it installed all the way in place during the install. Once you recheck and make sure it is in place they fit great.
07-29-2016, 05:16 PM
#17
just ordered 1 and used the cupon code and got 10% off.that 10% covered the nomex cover and shipping.great deal.
07-29-2016, 06:06 PM
#18
Le Mans Master
Since "intake only" would likely be a common mod, do any of the vendors provide a tune, or guidance?
If I own HPTuners (which I do) seems a shame to reinvent the wheel if a dozen or more people have already tuned this exact engine for this exact part!
In fact, if someone can provide an HPT file, I'll buy a darned intake. I think I'm convinced, just have no interest in tracking down a tuner to make it all work.
If I own HPTuners (which I do) seems a shame to reinvent the wheel if a dozen or more people have already tuned this exact engine for this exact part!
In fact, if someone can provide an HPT file, I'll buy a darned intake. I think I'm convinced, just have no interest in tracking down a tuner to make it all work.
07-29-2016, 08:25 PM
#19
Safety Car
I think this will be the first mod I do after I buy my Z06 next summer. I wonder what just the intake and a Diablosport tune would get me....don't plan on doing headers.
07-29-2016, 08:34 PM
#20
Supporting Vendor
Thread Starter
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes
on
313 Posts
St. Jude Donor '09
Actually, I'm just Trumping with you.
I'll reach out to our dealer or you can. He just ordered 5 more, so he must be pleased.
Tony's Corvette
Auto repair shop in Maryland
Address: 7500 Rickenbacker Dr, Gaithersburg, MD 20879
Phone: (240) 408-4136