When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2003 z06, using PAC interface to add JL 500/1 to factory head unit with a subthump box running a 10" W6. I have tried and tried to get a signal from the interface with no luck. No voltage at all. Nothing. Evertything else works like a champ. Anyone have any experience here? Thanks.
2003 z06, using PAC interface to add JL 500/1 to factory head unit with a subthump box running a 10" W6. I have tried and tried to get a signal from the interface with no luck. No voltage at all. Nothing. Evertything else works like a champ. Anyone have any experience here? Thanks.
Careful, I am going through the exact same thing you are right now. Wasn't getting a signal no matter what I tried. Now, I'm totally screwed as it seemed to blow out my bose door sub amps and cd changer.
Time for a whole new system, which I didn't want to spend on right now.
2003 z06, using PAC interface to add JL 500/1 to factory head unit with a subthump box running a 10" W6. I have tried and tried to get a signal from the interface with no luck. No voltage at all. Nothing. Evertything else works like a champ. Anyone have any experience here? Thanks.
smknvette . . . which account did you send the e-mail to? I don't seem to find it. I am about ready to get the dead-blow hammer out and work over the PAC box . . . .
smknvette . . . which account did you send the e-mail to? I don't seem to find it. I am about ready to get the dead-blow hammer out and work over the PAC box . . . .