Odd problem with my DNX7100
Thread Starter
Le Mans Master
Joined: Jun 2006
Posts: 5,562
Likes: 1
From: Bedford TX
Odd problem with my DNX7100
So everything has been working great. Untill a few days ago when it sounds like all the sound is coming out of the front left speaker. If you turn the volume up, it continues to get louder out of that speaker and then all of a sudden it equals out and sounds like normal. Randomly it will switch everything to that one speaker and get really loud without the volume turning up.
Config:
Headunit: Kenwood DNX7100
Amp: JL Audio 500/5
Door speakers: Focal Polygalss Components
Rear Speakers: Focal Polyglass Coaxials
Anyone have any ideas?
The only thing i can think of is i used pretty crappy RCA's. Everything else is wired right. I just dont know why it was working fine and now its not.
Config:
Headunit: Kenwood DNX7100
Amp: JL Audio 500/5
Door speakers: Focal Polygalss Components
Rear Speakers: Focal Polyglass Coaxials
Anyone have any ideas?
The only thing i can think of is i used pretty crappy RCA's. Everything else is wired right. I just dont know why it was working fine and now its not.
Racer
Joined: Sep 1999
Posts: 464
Likes: 0
From: Conyers Georgia
Try switching the RCA's around at the amp (channels 1 - 4),and when the problem occurs again, if the sound still only comes from the front left, the amp is the problem. If the sound moves to the channel with the left front RCA plugged in to it, the problem is with the head unit or possibly the RCA's.
Thread Starter
Le Mans Master
Joined: Jun 2006
Posts: 5,562
Likes: 1
From: Bedford TX
Try switching the RCA's around at the amp (channels 1 - 4),and when the problem occurs again, if the sound still only comes from the front left, the amp is the problem. If the sound moves to the channel with the left front RCA plugged in to it, the problem is with the head unit or possibly the RCA's.
This isn't sounding good
