iPod Install - Base Problem
Thread Starter
Le Mans Master
Joined: Aug 2006
Posts: 5,141
Likes: 0
From: El Paso Texas
St. Jude Donor '09-'10-'11
iPod Install - Base Problem
I did the iSimple interface this weekend. everythign seems to have checked out and work fine, BUT i now have no base. I noticed in the fuse panel there is a 20 amp blade fuse, which is not blown, however there is another fuse labeled bose speakers and it is a large ice cube looking deal with 4 pins. I don't know how to check to see if it is blown or not.
Is it possible it is just a fuse or did I damage the system some other way. I did not disconnect the battery while doing the work so I am hoping I didnt screw up too bad.
TIA
Is it possible it is just a fuse or did I damage the system some other way. I did not disconnect the battery while doing the work so I am hoping I didnt screw up too bad.
TIA
Team Owner
Joined: Apr 2001
Posts: 54,204
Likes: 180
From: S.W. Ohio. . . . . . NRA Life Member
