Audio/Electronics Stereo System Installation Info, Amplifiers, Subwoofers, Radar Detectors, Police Scanners, and CB Radios for the Corvette
Sponsored by:
Sponsored by: DashLynx

Old School Pioneer Supertuner wireing question

Thread Tools
 
Search this Thread
 
Old 04-26-2008, 12:39 PM
  #1  
jimbo1972
Burning Brakes
Thread Starter
 
jimbo1972's Avatar
 
Member Since: May 2005
Location: RedSoxNation Cape Cod, MA
Posts: 1,154
Received 44 Likes on 17 Posts

Default Old School Pioneer Supertuner wireing question

Hey Guys,
I am putting my 77 Coupe back together and cant remember which wires are for the speakers.
Its an old school Pioneer Supertuner, probably mid to late 80's with the *****!! yup that right, *****!
I know green wires and grey wires are speakers but this is kinda funky.
Its got grey, and grey/black. Green and green/black. And then the rears(i think) are just solo grey/black but is split at the end for two connections and same with the green.
How do I just wire in two speakers for max output. Also, which is left and right, green or grey.
Sorry for the novice questions but its been a while since I wired in an old school radio.
Thanks
Jimbo
Old 04-26-2008, 12:57 PM
  #2  
jimbo1972
Burning Brakes
Thread Starter
 
jimbo1972's Avatar
 
Member Since: May 2005
Location: RedSoxNation Cape Cod, MA
Posts: 1,154
Received 44 Likes on 17 Posts

Default

Its a KEH-2929.
Thanks
Jimbo
Old 04-26-2008, 01:24 PM
  #3  
I'm Batman
Team Owner
Support Corvetteforum!
 
I'm Batman's Avatar
 
Member Since: Oct 2004
Location: Springfield MO
Posts: 23,831
Likes: 0
Received 6 Likes on 6 Posts
St. Jude Donor '07

Default

Did you ask Pioneer?
Old 04-26-2008, 02:00 PM
  #4  
jimbo1972
Burning Brakes
Thread Starter
 
jimbo1972's Avatar
 
Member Since: May 2005
Location: RedSoxNation Cape Cod, MA
Posts: 1,154
Received 44 Likes on 17 Posts

Default

I checked the Pioneer site but got no diagrams from them.
Jimbo
Old 04-26-2008, 11:08 PM
  #5  
pentavolvo
Le Mans Master
 
pentavolvo's Avatar
 
Member Since: Nov 2004
Location: Dyer IN
Posts: 8,718
Received 19 Likes on 19 Posts
Cruise-In IX Veteran

Default

what colors u got
Old 04-27-2008, 07:01 AM
  #6  
Ganey
Race Director
 
Ganey's Avatar
 
Member Since: Apr 1999
Location: CORVETTE 77 385 C.I. TEXAS
Posts: 11,520
Likes: 0
Received 12 Likes on 12 Posts

Default

Pioneer KE-6363 (& 5353) 80s wiring diagram should answer your questions:

Green Left
Gray Right

Black or w/ Black stripe indicates - so a Gray w/Black indicates Right -.

You may need to state all wires. Do you have a Green w/Red & a Gray w/ Red?
Old 04-27-2008, 10:00 AM
  #7  
jimbo1972
Burning Brakes
Thread Starter
 
jimbo1972's Avatar
 
Member Since: May 2005
Location: RedSoxNation Cape Cod, MA
Posts: 1,154
Received 44 Likes on 17 Posts

Default

Here are the speaker wires:
Green
Green w/ red
Grey
Grey w/red
Green w/black (has two connections on the end)
Grey w/black (also has two connections on the end)
Thanks for any help you can give me
Jimbo
Old 04-27-2008, 10:25 AM
  #8  
Ganey
Race Director
 
Ganey's Avatar
 
Member Since: Apr 1999
Location: CORVETTE 77 385 C.I. TEXAS
Posts: 11,520
Likes: 0
Received 12 Likes on 12 Posts

Default

How do I just wire in two speakers for max output....
Thanks
Jimbo
Jimbo
two speakers
Green Left +
Green w/black L-

Gray Right +
Grey w/black R-


If using 4 Speakers the
Green w/ Red would be L+ Front
Grey w/ Red would be R+ Front
& evidently the Green w/black L- on both Lefts
& Grey w/black R- on both Rights.

PS L=Left R=Right

Are you going to put the speakers in the doors or kicks?

Old 04-27-2008, 10:31 AM
  #9  
jimbo1972
Burning Brakes
Thread Starter
 
jimbo1972's Avatar
 
Member Since: May 2005
Location: RedSoxNation Cape Cod, MA
Posts: 1,154
Received 44 Likes on 17 Posts

Default

Thats the info I needed! I am only running two speakers for now.
Bubba, the previous owner actually installed some nice speakers in the storage lids behind the seats.
Thanks again!!!
Jimbo

Get notified of new replies

To Old School Pioneer Supertuner wireing question




Quick Reply: Old School Pioneer Supertuner wireing question



All times are GMT -4. The time now is 04:07 PM.