Alpine Installation Issue
Thread Starter
Pro
Joined: Sep 2002
Posts: 688
Likes: 0
From: Rye Brook, NY
Alpine Installation Issue
No matter what I try, I cannot get my Alpine 9857 flush. Either with the vrum vrum plate or the blue LED humount. The problem is the RCA cables are hitting the black plastic behind the unit. I believe this is the AC unit. Can I cut a hole in this or is that doom? Where can I buy or have custom made RCA adapters that are as small as possible? I hate the look of the stereo sticking out over a 1/4 inch. Thanks for the help.
Adam
Adam
Thread Starter
Pro
Joined: Sep 2002
Posts: 688
Likes: 0
From: Rye Brook, NY
So before I cut...the plastic with the lines in it is just a panel. No damage if I cut a hole on the left side? What have you used to cut it? Do you happen to have a picture? Thanks for your help, much appreciated.
Intermediate
Joined: Apr 2008
Posts: 43
Likes: 0
From: Lake Wylie SC
I bought these from Radio Shack to get my Alpine iVA-X200 to fit:
http://www.radioshack.com/product/in...entPage=search
http://www.radioshack.com/product/in...entPage=search
Last edited by gilkman; Jul 29, 2008 at 08:36 PM. Reason: added image
