Does a C6 need the Big 3?
Thread Starter
Burning Brakes
Joined: Oct 2007
Posts: 1,236
Likes: 0
From: Los Angeles CA
Does a C6 need the Big 3?
As the topic title asks, does the c6 need the big3 done to it?
I've read in some older posts that it's not really necessary with the c6. But if it is needed, are there any c6 specific instructions on how to do it?
I've read in some older posts that it's not really necessary with the c6. But if it is needed, are there any c6 specific instructions on how to do it?
Le Mans Master
Joined: Jun 2004
Posts: 9,289
Likes: 16
From: Skippack PA
St Jude Donor '13
I'm running a Zapco DC1000.4 setup to where it's running essentially 600W between fronts & subs. No sign of dimming lights, etc. Not sure where the line is though but for my setup it's OK without the big 3.
Thread Starter
Burning Brakes
Joined: Oct 2007
Posts: 1,236
Likes: 0
From: Los Angeles CA
TheKomoman and NYC6, do either of you notice any dimming of the lights while under full load?
Do you have the big3 installed?
Do you have the big3 installed?
Thread Starter
Burning Brakes
Joined: Oct 2007
Posts: 1,236
Likes: 0
From: Los Angeles CA
This is true, but I don't really want to mess with more than I have to if it's not necessary. I don't want to introduce another source of problems, if they do arise, ya know?
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Burning Brakes
Joined: Oct 2007
Posts: 1,236
Likes: 0
From: Los Angeles CA
Thread Starter
Burning Brakes
Joined: Oct 2007
Posts: 1,236
Likes: 0
From: Los Angeles CA
604x:
Watts per Channel @ 4Ω: 4 x 75
Watts per Channel @ 2Ω: 4 x 150
Bridged Mono @ 4Ω: 2 x 300
302a:Watts per Channel @ 2Ω: 4 x 150
Bridged Mono @ 4Ω: 2 x 300
Watts per Channel @ 4Ω: 2 x 75
Watts per Channel @ 2Ω: 2 x 150
Bridged Mono @ 4Ω: 1 x 300
Watts per Channel @ 2Ω: 2 x 150
Bridged Mono @ 4Ω: 1 x 300
Team Owner
Joined: Nov 2006
Posts: 21,136
Likes: 212
From: Long Island New York
At idle when its very dark and the music is cranked up I notice a miniscule amount of pulsing. When I bring the RPM's just a little its fine. And no I didnt do the big three. And I have 750 watts.
