Fiberglass boxes
Thread Starter
Instructor
Joined: Apr 2007
Posts: 225
Likes: 0
From: MCMINNVILLE TN
Fiberglass boxes
ALLRIGHT I JUST FINISHED MY INSTALL... WITH A LCD, AMP, COMPS., AND 2 8" SUBS ALL POLK AUDIO
... WE ARE NOW GOING TO CAST A MOLD OFF MY STEALTH BOX AND MAKE A COUPLE MORE OF THEM.. WHILE THIS IS BEING DONE WE ARE ALSO ADDING 2 MORE 8" SUBS IN FIBERGLASS BOXES MOLDED INTO THE BACK CORNERS.. THE STEALTH BOX SHOULD GIVE PLENTY OF CUBES FOR AT LEAST 1 12" SUB... WOULD ANYONE BE INTERESTED IN THESE IF WE KELP THE PRICE AROUND 100-150.. AND ABOUT THE SAME ON THE SIDE BOXES... AND WHILE WE R THERE WE R GOING TO MAKE A MOLD TO MAKE THE DOOR PLATES... THIS WILL BE DONE IN MOSTLY FIBERGLASS WITH OPPS FOR PAINT MATCH, CARBONFIBER OVERLAY, OR CARPET... ANY REPLYS WOULD BE WELCOMED
... WE ARE NOW GOING TO CAST A MOLD OFF MY STEALTH BOX AND MAKE A COUPLE MORE OF THEM.. WHILE THIS IS BEING DONE WE ARE ALSO ADDING 2 MORE 8" SUBS IN FIBERGLASS BOXES MOLDED INTO THE BACK CORNERS.. THE STEALTH BOX SHOULD GIVE PLENTY OF CUBES FOR AT LEAST 1 12" SUB... WOULD ANYONE BE INTERESTED IN THESE IF WE KELP THE PRICE AROUND 100-150.. AND ABOUT THE SAME ON THE SIDE BOXES... AND WHILE WE R THERE WE R GOING TO MAKE A MOLD TO MAKE THE DOOR PLATES... THIS WILL BE DONE IN MOSTLY FIBERGLASS WITH OPPS FOR PAINT MATCH, CARBONFIBER OVERLAY, OR CARPET... ANY REPLYS WOULD BE WELCOMED
Last edited by Corvette_Brett; Sep 22, 2008 at 05:59 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Instructor
Joined: Apr 2007
Posts: 225
Likes: 0
From: MCMINNVILLE TN
right now its just for a c-5 coupe but a friend of mine has a z06 we will getting a mold from too... that being said if anyone close has a c-6 that they will loan us for a couple of hours then could do them... as far as the fitment of subs. the lid or secound piece of the mold is modular and could be changed to fit anything upon request... the hole goal of this is to get a drop in box out there that has the room to hold larger speakers or more smaller ones and shed several pounds off a mdf box but still look like it came from the factory