Such thing as a 4-way active crossover?
Thread Starter
Former Vendor
Joined: Nov 2005
Posts: 8,995
Likes: 2
From: Spring Texas
St. Jude Donor '08
Such thing as a 4-way active crossover?
I currently have a PXA H701 processor which is awesome except I have a 3-way front stage plus the rears and sub.
I'm really looking for a way to time-correct my midbass to midrange. Currently i have the Midrange and midbass on the same channel then split through the SPX MB passive crossover. When scope tuning the gains, i found that right around the midrange-midbass crossover point the pure sine wave has a second "hump" that appears to be the midrange a fraction of a second ahead of the midbass. (about 6" differncee in position from the center of each driver)
the good news is they are in phase with eachother
Suggestions?
I'm really looking for a way to time-correct my midbass to midrange. Currently i have the Midrange and midbass on the same channel then split through the SPX MB passive crossover. When scope tuning the gains, i found that right around the midrange-midbass crossover point the pure sine wave has a second "hump" that appears to be the midrange a fraction of a second ahead of the midbass. (about 6" differncee in position from the center of each driver)
the good news is they are in phase with eachother
Suggestions?
Melting Slicks
Joined: Dec 2004
Posts: 2,394
Likes: 0
From: Bay Area CA
I believe that the 4 way crossover options are somewhat limited. In my vette I have the PPI DCX-730 handling my front stage, and my HU (Eclipse 8053) handling my sub requirements. Check out DIYMA as I am sure they have info on what is out there.
G'luck bro
Fej
G'luck bro
Fej
