So I can't find anyone posting actually pics of what they're doing with the wiring.

You guys all post about the interfaces that you use, but don't show pics or tell how you are hooking them up.

Their are too many different ones to choose from and I have even seen posts about guys that just install RCA ends onto the factory harness (but they don't say what color wires to use.

I just need to know which wires, of the three factory harness plugs on the car, are being hooked up to the interface. i.e. which wires need to the pre-amp signal in order to utilize the door woofers.

Please help with pics or describe the colors of the wires to use.

Thanks

Prints can be found HERE

You'll need to supply the line level source to each side and the 12v trigger once.

so, does any one know which wires I would solder RCA ends onto? I would like to use the Sub Preamp outs on my aftermarket HU to send the signal to the 8" woofers.

So, which wires are the positive and negative for the woofers?

Thanks

I have a lot of pics here -- including the wiring.

http://forums.corvetteforum.com/audi...-speakers.html

i would start with the FAQ, trust me its ALL there

Is it really that hard to just answer the question about the wires. I've read the FAQ and didn't find the information. The schematics aren't exactly easy to read... Would really like to know what to tap for subwoofer amp signal.

Get an AOEM-Vet1