Scratched bezel
Thread Starter
Melting Slicks
Joined: Jan 2010
Posts: 2,205
Likes: 67
From: Cumming GA
Scratched bezel
Had a little mishap when installing an aftermarket HU. I purchased a Metra dash kit from Dennis at DD Mods which he sanded down and painted. Is there any way to touch it up or does it need to be repainted? Any suggestions?
Former Vendor
Joined: Sep 2005
Posts: 18,293
Likes: 137
From: Hazel Green, Wi www.doubledmods.com
St. Jude Donor '12-'13
I will send you another and just have you send back the first one
this work?
if so send me a pm
Melting Slicks
Joined: May 2007
Posts: 3,269
Likes: 25
From: Simi Valley Ca
I sanded and painted my bezzel myself. I used matt black paint from home depot and it matched perfect. I just applied it in very light coats so that I could get a light texture to match the AC controls.
That said, if Dennis is willing to send you another one as mentioned above, that is an offer you might not be able to pass on. He is well regarded around here and I can see why. That is a very generous offer.
That said, if Dennis is willing to send you another one as mentioned above, that is an offer you might not be able to pass on. He is well regarded around here and I can see why. That is a very generous offer.
