Sub Grill Info PLEASE!
Thread Starter
Le Mans Master
Joined: Dec 2005
Posts: 6,460
Likes: 16
From: hamilton alabama
Sub Grill Info PLEASE!
I have a IDQ10V3 sub and I know they are a tad bigger than a 10" sub and with that said I am wanting to put a grill over it for several reasons but mainly to protect the sub and was wondering if a 10" grill would work or would i need to get a 12" grill ?
Rick
Rick
Former Vendor
Joined: Oct 2007
Posts: 2,713
Likes: 9
From: Morgan Utah
I have been meaning to order one of these to see it it will fit, better yet see if they can measure one while on the phone, if they fit I will order a bunch.
Available in black and chrome, I like black best
http://http://www.parts-express.com/...number=260-440
I also need to know if the 12 will fit the IDQ12 I am installing in my truck.
Rick
Available in black and chrome, I like black best
http://http://www.parts-express.com/...number=260-440
I also need to know if the 12 will fit the IDQ12 I am installing in my truck.
Rick
Thread Starter
Le Mans Master
Joined: Dec 2005
Posts: 6,460
Likes: 16
From: hamilton alabama
I have been meaning to order one of these to see it it will fit, better yet see if they can measure one while on the phone, if they fit I will order a bunch.
Available in black and chrome, I like black best
http://http://www.parts-express.com/...number=260-440
I also need to know if the 12 will fit the IDQ12 I am installing in my truck.
Rick
Available in black and chrome, I like black best
http://http://www.parts-express.com/...number=260-440
I also need to know if the 12 will fit the IDQ12 I am installing in my truck.
Rick
Melting Slicks
Joined: May 2007
Posts: 3,269
Likes: 25
From: Simi Valley Ca
Thread Starter
Le Mans Master
Joined: Dec 2005
Posts: 6,460
Likes: 16
From: hamilton alabama
Here is a better link.
http://www.parts-express.com/pe/show...number=260-440
http://www.parts-express.com/pe/show...number=260-440
BUT! 
i am looking to do a plain mesh grill alot like this http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT
Thread Starter
Le Mans Master
Joined: Dec 2005
Posts: 6,460
Likes: 16
From: hamilton alabama
I was thinking of either getting a 10" grill like the 1 posted in the link i posted above and using a dremel to see if it can be made to fit or thinking of getting a 12" grill and centering it on the sub and making holes in the plastic longer so it could be bolted down 
hopefully was looking for info on which i have a better shot at making work
hopefully was looking for info on which i have a better shot at making work
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
