C6 door speaker?
Thread Starter
Race Director
Joined: Oct 2010
Posts: 14,475
Likes: 786
From: Las Vegas NV
C6 door speaker?
I'm about to upgrade the speakers (Bose) in the doors. I got some Polk db6501 components. Do the tweeters fit behind the grill on the door panel in place of the 3" Bose drivers? I don't want to have to cut a hole for them to go on the outside of the panel. I do have some adapter plates on the way too. Also, where is a good place to mount the crossover box? Finally, can the speaker wire be run through the same place as the factory wires on the door to get into the interior? I'm looking forward to doing this project. The sound system in this car is the only thing about it that I can't live with.
Team Owner
Joined: Nov 2006
Posts: 21,136
Likes: 212
From: Long Island New York
You should also check out this sticky. Some good stuff in there.
http://forums.corvetteforum.com/audi...audio-faq.html
http://forums.corvetteforum.com/audi...audio-faq.html
Thread Starter
Race Director
Joined: Oct 2010
Posts: 14,475
Likes: 786
From: Las Vegas NV
I will be using the factory nav HU. I got an ADD-GM24 harness. I will alter it to add the RCA connectors and run RCA cables to an aftermarket amp. Front channels will be used for the front speakers and rear channels will power the sub. I will be getting a sub in the back in the near future. Just upgrading the door speakers for now.
I read through that audio thread. That's where I came up with the plan for using the factory HU and the altered harness.
I read through that audio thread. That's where I came up with the plan for using the factory HU and the altered harness.
Instructor
Joined: Jul 2010
Posts: 124
Likes: 0
From: Atlanta GA
I will be using the factory nav HU. I got an ADD-GM24 harness. I will alter it to add the RCA connectors and run RCA cables to an aftermarket amp. Front channels will be used for the front speakers and rear channels will power the sub. I will be getting a sub in the back in the near future. Just upgrading the door speakers for now.
I read through that audio thread. That's where I came up with the plan for using the factory HU and the altered harness.
I read through that audio thread. That's where I came up with the plan for using the factory HU and the altered harness.
Definitely EV, keep us posted. I hope everything goes good.
Pro
Joined: Jul 2002
Posts: 587
Likes: 11
I'm thinking about using those speakers in my Z. I have had Image dynamics and now have memphis in the doors. I've had Polks and like the clean sound...post up how you like the sound.
to the other guys ... is mounting the tweet that high in the door too far from the 6.5" ? My ID speakers sounded good but seems to have no Bass to them and I heard the tweet might have been too high or too far away from the other driver. True ? Will his Polks sound better if the tweet is mounted closer together ? It seems like a logical choice to put the tween in the upper door but i really wonder if it is best location. Even at -3db on the crossover the tweet seemed to override the mid-bass in the lower part of the door.
I'm not trying to hijack this tread but it might help the orig. poster
thx guys
to the other guys ... is mounting the tweet that high in the door too far from the 6.5" ? My ID speakers sounded good but seems to have no Bass to them and I heard the tweet might have been too high or too far away from the other driver. True ? Will his Polks sound better if the tweet is mounted closer together ? It seems like a logical choice to put the tween in the upper door but i really wonder if it is best location. Even at -3db on the crossover the tweet seemed to override the mid-bass in the lower part of the door.
I'm not trying to hijack this tread but it might help the orig. poster
thx guys
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Drifting
Joined: Jun 2006
Posts: 1,295
Likes: 18
From: Chicago Illinois
St. Jude Donor '12
Thread Starter
Race Director
Joined: Oct 2010
Posts: 14,475
Likes: 786
From: Las Vegas NV
I'm thinking about using those speakers in my Z. I have had Image dynamics and now have memphis in the doors. I've had Polks and like the clean sound...post up how you like the sound.
to the other guys ... is mounting the tweet that high in the door too far from the 6.5" ? My ID speakers sounded good but seems to have no Bass to them and I heard the tweet might have been too high or too far away from the other driver. True ? Will his Polks sound better if the tweet is mounted closer together ? It seems like a logical choice to put the tween in the upper door but i really wonder if it is best location. Even at -3db on the crossover the tweet seemed to override the mid-bass in the lower part of the door.
I'm not trying to hijack this tread but it might help the orig. poster
thx guys
to the other guys ... is mounting the tweet that high in the door too far from the 6.5" ? My ID speakers sounded good but seems to have no Bass to them and I heard the tweet might have been too high or too far away from the other driver. True ? Will his Polks sound better if the tweet is mounted closer together ? It seems like a logical choice to put the tween in the upper door but i really wonder if it is best location. Even at -3db on the crossover the tweet seemed to override the mid-bass in the lower part of the door.
I'm not trying to hijack this tread but it might help the orig. poster
thx guys
Thread Starter
Race Director
Joined: Oct 2010
Posts: 14,475
Likes: 786
From: Las Vegas NV
Le Mans Master
Joined: Aug 1999
Posts: 5,515
Likes: 646
From: Silicon Valley and Yosemite, CA
I have my X-overs mounted under the dash. I was always taught by someone I respected in car audio to never mount the x-overs in the doors due to the slamming, vibration and moisture.
Pro
Joined: Jul 2002
Posts: 587
Likes: 11
I know my crossovers where tucked into the panels in the foot wells right in front of the doors. You can actually put them behind the plastic side plates without "mounting" to anything. Mine seemed to fit tightly, but I guess it depends on the size of the crossover.
