Subwoofer Box
Thread Starter
Team Owner
Joined: Mar 2011
Posts: 22,438
Likes: 85
From: Born: Mexico City Live:San Antonio, Texas
Subwoofer Box
I got everything ready to install and looking for Woofer Box ideas.
Im either going with 2 8's or 2 10's
Please post pictures if you can
Im either going with 2 8's or 2 10's
Please post pictures if you can
Tech Contributor
Joined: May 2003
Posts: 7,035
Likes: 134
From: North Augusta, SC
$120 shipped if you want it.
Sub is Pioneer Premier TS-SW1201S4, amp mounting area is 10" x 13", targa top is still easily stored.
Sub is Pioneer Premier TS-SW1201S4, amp mounting area is 10" x 13", targa top is still easily stored.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Tech Contributor
Joined: May 2003
Posts: 7,035
Likes: 134
From: North Augusta, SC
It's not hard to DIY your own box out of MDF, especially if you make it square. The footprint of the bottom piece is below, for a stowed hatch to clear the box it has to be under 9" tall at the point that's 9" behind the hump behind your seat.
Do the math first for the sub volume requirements and amp footprint, then buy the gear once you're sure the box will work. Hardest part is carpeting it if you get the good stuff, ordinary felt is simple.
Another one of mine along the way. The sub had to be angled so I could still get the hatch stowed.
Do the math first for the sub volume requirements and amp footprint, then buy the gear once you're sure the box will work. Hardest part is carpeting it if you get the good stuff, ordinary felt is simple.
Another one of mine along the way. The sub had to be angled so I could still get the hatch stowed.
