How to connect RCA Cable?
Tech Contributor
Joined: May 2003
Posts: 7,035
Likes: 134
From: North Augusta, SC
Connect front RCA outputs to A, rear to B, and sub to Sub.
Set channel A & B HPF switches to HPF, turn ***** to about 90.
Turn sub LPF **** to about 90 also.
Set radio to 'full pass' or no filters, but make sure sub output is set to ON.
Start with bass boost at 0 and all min/max ***** at 1.
Speaker and power wires should be obvious. Fronts are A, rears are B.
See how that sounds
Once at that point, research or ask how to 'tune' amp with 75% volume method.
Set channel A & B HPF switches to HPF, turn ***** to about 90.
Turn sub LPF **** to about 90 also.
Set radio to 'full pass' or no filters, but make sure sub output is set to ON.
Start with bass boost at 0 and all min/max ***** at 1.
Speaker and power wires should be obvious. Fronts are A, rears are B.
See how that sounds
Once at that point, research or ask how to 'tune' amp with 75% volume method.
