Help wiring in .5 Cap
Thread Starter
Pro
Joined: May 2000
Posts: 529
Likes: 0
From: Bellevue NE
Help wiring in .5 Cap
I purchased this from another forum member didn't come with paperwork. I'm going to use this for my bass amp. It has a pos and neg terminals, however I assume I wire it in series with the power lead? :confused:
Help?
Help?
Melting Slicks
Joined: May 2000
Posts: 2,148
Likes: 1
From: Chandler AZ
Re: Help wiring in .5 Cap (Jeff M)
You wire it in parallel with your amplifier:
+12v to the pos of the cap and pos (power) of the amp
chassis ground to neg of the cap and neg (ground) of the amp
Mount it as near as possible to the amp, keeping the wires short.
+12v to the pos of the cap and pos (power) of the amp
chassis ground to neg of the cap and neg (ground) of the amp
Mount it as near as possible to the amp, keeping the wires short.
Melting Slicks
Joined: May 2000
Posts: 2,148
Likes: 1
From: Chandler AZ
Re: Help wiring in .5 Cap (Jeff M)
You would have AC-coupled the power line wiring it in series; which would have been fun since it as soon as it charged up would have blocked the 12v DC :eek:
