Trouble shooting
Thread Starter
Instructor
Joined: Aug 2008
Posts: 131
Likes: 0
From: Seymour Tn.
Trouble shooting
I bought the new Kenwood DNN990HD for my 2010 GS Manual trans. I trying to add a Kenwood CMOS300 backup camera. The problem I'm having is howto wire it so that when I go to reverse the screen switches to view the rear view camera. I'm using a Metra VT-GMOS-04 Factory Integration Adapter and have wire it according to instruction. Any help would be great.
Tech Contributor
Joined: May 2003
Posts: 7,035
Likes: 134
From: North Augusta, SC
The HU purple wire needs to be connected to the light green wire in the passenger footwell, check out first pic in post #2 HERE
There may also be a setting on the HU to enable it, and possibly one you need to set for +12v (vs. ground) to trigger the camera.
There may also be a setting on the HU to enable it, and possibly one you need to set for +12v (vs. ground) to trigger the camera.
Thread Starter
Instructor
Joined: Aug 2008
Posts: 131
Likes: 0
From: Seymour Tn.
Markcz thanks it worked like champ. I made 1 improvement instead of taping into the wiring harness I got an add a fuse and installed it into the reverse light fuse with a 2amp fuse. Thanks again 
