Audio/Electronics Stereo System Installation Info, Amplifiers, Subwoofers, Radar Detectors, Police Scanners, and CB Radios for the Corvette
Sponsored by:
Sponsored by: DashLynx

Pioneer HU won't turn off after install

Thread Tools
 
Search this Thread
 
Old 11-10-2013, 09:30 AM
  #1  
D. Lil
Instructor
Thread Starter
 
D. Lil's Avatar
 
Member Since: Sep 2013
Location: Dallas Texas
Posts: 132
Received 1 Like on 1 Post
Default Pioneer HU won't turn off after install

Installed a Pioneer DEH-X6500BT single din into my '04 Z06. Utilized the roem/pac harness to keep bose speakers and I took the red wire and wired it into the yellow wire under the steering column like the directions said. Now the head unit is always on when the battery is connected. Doesn't matter if I lock the car open both doors etc. etc.

Everything sounds just fine and works great FYI.

There are two yellow wires under the column; is one always hot and one not or should I just run the wire to the wiper fuse?

Thanks for any responses!
Old 11-10-2013, 09:38 AM
  #2  
Zorlac
Burning Brakes
 
Zorlac's Avatar
 
Member Since: Mar 2010
Location: Trussville AL
Posts: 960
Likes: 0
Received 1 Like on 1 Post

Default

The red should go to switched power I believe.
Old 11-10-2013, 09:45 AM
  #3  
D. Lil
Instructor
Thread Starter
 
D. Lil's Avatar
 
Member Since: Sep 2013
Location: Dallas Texas
Posts: 132
Received 1 Like on 1 Post
Default

Well, I stopped being lazy and used my DMM to find the right yellow wire. It was hiding behind the larger group of wires that contained to two yellow wires.

Mods feel free to delete this thread.

Get notified of new replies

To Pioneer HU won't turn off after install




Quick Reply: Pioneer HU won't turn off after install



All times are GMT -4. The time now is 05:20 AM.