Noise in System
Do a quick DIY 'tune' on your amp and see where it ends up...
Download test tones HERE
Turn down all amp gains to 0
Play the 50Hz tone and set radio volume at about 75%
Turn up sub gain until you hear distortion, then back off a touch. Note the level and turn it back down to 0
Play the 1kHz tone at 75% volume and turn up front gain until distortion, then back off a touch.
Turn radio volume down and turn it off.
Adjust sub gain back to level noted during test.
Play several songs that you're very familiar with, listen to balance between sub and fronts. Since both are set at maximum distortion-free level, if not balanced turn down the one that is overpowering the other (fronts vs. sub).
This would be the ideal level for your amp gains. If you still have the hiss, then turn down both gains evenly to a point where you can live with it. If you're lucky the max level won't have much hiss.







