sound deadner for doors
Thread Starter
Drifting
Joined: Aug 2014
Posts: 1,627
Likes: 175
From: North pole
sound deadner for doors
i'm ready to install my system.. did a search still alittle confused. 1 when insulating the doors what part or parts of the door should be done? also without spending alot of money what would you buy? and do they sell a complete kit? thanks
3rd Gear
Joined: Nov 2015
Posts: 3
Likes: 0
From: Summersdie PEI
I usually use dynamat. Buy the roll or sheet stuff and cut to shape size you want. Normally id put as much on the inner door skin as i could easily reach. and on the bracing where the speaker mounts. As a side note remember to protect your speaker plugs from moisture. Hopefully this can be of some help.
Thread Starter
Drifting
Joined: Aug 2014
Posts: 1,627
Likes: 175
From: North pole
I usually use dynamat. Buy the roll or sheet stuff and cut to shape size you want. Normally id put as much on the inner door skin as i could easily reach. and on the bracing where the speaker mounts. As a side note remember to protect your speaker plugs from moisture. Hopefully this can be of some help.
Burning Brakes
Joined: Dec 2010
Posts: 1,151
Likes: 190
From: SoCal
For information, this site, Sound Deadener Showdown, has some absolutely great information regarding deadening and noise absorption broken down for each area of the car. I HIGHLY suggest reading it for a really in-depth knowledge of the process.
Also, even though that website sells stuff as well, I highly recommend RAAMAUDIO http://www.raamaudio.com/ for materials. They are highly effective and super easy to use... and they are a forum sponsor and have outstanding customer support, so that never hurts either.
Also, even though that website sells stuff as well, I highly recommend RAAMAUDIO http://www.raamaudio.com/ for materials. They are highly effective and super easy to use... and they are a forum sponsor and have outstanding customer support, so that never hurts either.
Last edited by mdiiulio; Nov 30, 2015 at 12:07 AM.
