Template for a 6,4,& tweeter
Guest
Posts: n/a
Template for a 6,4,& tweeter
Anyone have a template for a 6,4, & tweet in the door? I am wanting to purchase the CDT 3 ways but i want to find a template first. Hopefully VRUMVRUM will chime in, but do any of you know if i can get it to work? I hear its not the preferred avenue but i really like a 4" for vocals.
Thanks,
Matt
Thanks,
Matt
Melting Slicks
Joined: Jan 2002
Posts: 2,682
Likes: 0
From: Atlanta GA
Re: Template for a 6,4,& tweeter (nitrosuzie)
You may or may not be able to get all 3 speakers on the template. Also, keep in mind that the upper 1/3 of the template will fire directly into the door panel. I would suggest taking out the stock bose and use the housing as a template then make the mounts out of 1/4" hard board. I would only mount the 6" and 4" there, then mount the tweets in the door panel by the door handel or in the A pillars.
Team Owner
Joined: Feb 2003
Posts: 24,317
Likes: 0
From: Roll 20's...
Re: Template for a 6,4,& tweeter (leolufse)
You may or may not be able to get all 3 speakers on the template. Also, keep in mind that the upper 1/3 of the template will fire directly into the door panel. I would suggest taking out the stock bose and use the housing as a template then make the mounts out of 1/4" hard board. I would only mount the 6" and 4" there, then mount the tweets in the door panel by the door handel or in the A pillars.
Safety Car
Joined: Aug 2002
Posts: 4,390
Likes: 0
From: stop your crying... who cares
St. Jude Contributor
Re: Template for a 6,4,& tweeter (nitrosuzie)
Guest
Posts: n/a
Re: Template for a 6,4,& tweeter (Conquer)
Precisley!!!! That is exactly what i am looking for! I noticed that all 3 fit on the door. This is the exact setup that I want. Now, i need to find vrumvrum and see if he can make me the template. Thanks Conquer!
Matt
Matt
