Any tips or past threads for C5 interior door panel removal?
Burning Brakes
Joined: Oct 2003
Posts: 877
Likes: 0
From: Kansas City
Re: Any tips or past threads for C5 interior door panel removal? (JV02C5)
Be very careful with the clip that's behind the hand grip. How's that for a technical term. Sorry haven't had any coffee yet. Anyhow becareful with that little grip. It's hard not to break them in my opinion.
To pop off the friction clips just take a flat head screw driver and wrap it with a rag and gently pry it off. The rag will help prevent any scratches.
Goodluck and let's see some pics!
To pop off the friction clips just take a flat head screw driver and wrap it with a rag and gently pry it off. The rag will help prevent any scratches.
Goodluck and let's see some pics!
Burning Brakes
Joined: Oct 2003
Posts: 877
Likes: 0
From: Kansas City
Re: Any tips or past threads for C5 interior door panel removal? (noelc5)
Oh yah, don't forget to unclip the 3 plugs to the RDCM or LDCM. This will be obvious but use a small flat head on these bad boys too.
3rd Gear
Joined: May 2004
Posts: 3
Likes: 0
From: Redlands CA
Re: Any tips or past threads for C5 interior door panel removal? (JV02C5)
Try Ken Kings site, this should help.
http://www.vetteessentials.com/instr...or_handle.html
http://www.vetteessentials.com/instr...or_handle.html
Pro
Joined: Sep 2001
Posts: 602
Likes: 0
From: indianapolis indiana
Re: Any tips or past threads for C5 interior door panel removal? (Remington)
Here is a web site that might help.
http://www.carstereohelp.com/strcorvette.htm
http://www.carstereohelp.com/strcorvette.htm
