When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a subwoofer box made for a C5 (mine was a 99) that I need to get rid of. It has 2 10" Kicker Competition subs in it that still sound good but have looked better. The bottom of the box is made of particle board and enforced with fiberglass while the top is mostly formed from fiberglass mat. It cost me $300< for the box alone and it worked great.
I am asking $100 for the box to include the subs but not including shipping. If you are in the Baltimore area, come get it from me and you can take it for $80. If you are nice to me, I will throw in a Heineken for your trouble.
Do you have any idea how many cubic feet it is? I'm looking for one for my dad, but it needs at least 1.5 cubes for two tens(not sure if that is even possible in the center compartment, I haven't measured).
I would assume it is somewhere around 1 cubic feet per side (between 1.5 and 2.0 cu ft total). It's approximately 8" deep, 20" wide and up to 10" high. The top is tapered down in the front.
Also, I am asking $70 picked up or $80 + shipping to send it out.
Last edited by TheWoody; Jul 28, 2004 at 04:22 PM.
I would assume it is somewhere around 1 cubic feet per side (between 1.5 and 2.0 cu ft total). It's approximately 8" deep, 20" wide and up to 10" high. The top is tapered down in the front.
From those outside measurements, I come to somewhere between .5 and .7 cubic feet total...nowhere near 1.5 and 2 cubes total. Even if it weren't tapered, the biggest it could be would be 1728 / 8x20x10 = .93 cubes. With the taper, anywhere from .5 to .7 is realistic.