FS: Sparco Pro ADV seat, mount and harness package
07-21-2017, 05:12 PM
#1
Drifting
Thread Starter
Sparco Pro ADV seat, mount and harness package
Sold
Sparco Pro ADV seat, mount and harness package
Seat mount is a custom machined 7075-T6 aircraft aluminum copy of the MTI / Hardbar rail mount, Using MTI mount studs.
Had this mounted as a passenger setup for "slightly larger" instructors or passengers that I wanted to have side impact protection. Do not know if it fits the drivers side?
Seat is expired for WTW racing but good for HPDE. Cosmetic scratches on sides from use but no structural defects.
Harness is a 5 point RJS. Expired for wheel to wheel racing but in nice shape for HPDE or TT was always removed and stored inside house between track days.
Sold
Sparco Pro ADV seat, mount and harness package
Seat mount is a custom machined 7075-T6 aircraft aluminum copy of the MTI / Hardbar rail mount, Using MTI mount studs.
Had this mounted as a passenger setup for "slightly larger" instructors or passengers that I wanted to have side impact protection. Do not know if it fits the drivers side?
Seat is expired for WTW racing but good for HPDE. Cosmetic scratches on sides from use but no structural defects.
Harness is a 5 point RJS. Expired for wheel to wheel racing but in nice shape for HPDE or TT was always removed and stored inside house between track days.
Sold
Last edited by blkbrd69; 07-25-2017 at 09:26 PM. Reason: sold
