WTB: Dry Sump parts for LS1, LS2, LS3 or LS6.
02-13-2018, 07:22 PM
#1
Pro
Thread Starter
Dry Sump parts for LS1, LS2, LS3 or LS6.
I’m trying to piece together a dry sump system for my C6/LS2 Race Car. I’m looking for a 3 or 4 stage dry sump pump that mounts to the right side of the block where the a/c compressor would normally go including the pulley, drive hub and harmonic damper, dry sump oil pan and a 12 quart or 3 gallon oil tank. Please PM with your details.
Thanks for looking.
Thanks for looking.
02-23-2018, 12:03 AM
#2
Pro
Thread Starter
I picked up an Aviaid 3 gallon dry sump oil tank off Phoenix Craigslist today. I’m still looking for the rest of the parts listed above. Thanks for looking.
03-08-2018, 06:40 AM
#3
Drifting
Dry sump Parts
I've got a ARE Spintric for sale:
https://www.corvetteforum.com/forums...separator.html
This unit is installed between the pump and the dry sump tank and separates the oil from the air bubbles. A considerable amount of air is pulled through the engine by the scavenge pump. The Spintric greatly reduces the amount of foaming in the dry sump tank.
If you would like to hear all of the details of my ARE 4-stage system, PM me and let's exchange phone numbers.
Jim
https://www.corvetteforum.com/forums...separator.html
This unit is installed between the pump and the dry sump tank and separates the oil from the air bubbles. A considerable amount of air is pulled through the engine by the scavenge pump. The Spintric greatly reduces the amount of foaming in the dry sump tank.
If you would like to hear all of the details of my ARE 4-stage system, PM me and let's exchange phone numbers.
Jim
03-09-2018, 01:03 AM
#5
Pro
Thread Starter
Thanks for the replies.
In addition to the 3 gallon tank mentioned above, I just bought an ATI drive hub and am still looking for a 3-4 stage pump with right side mounting bracket and a pan with 2-3 scavenge ports on the right side.
In addition to the 3 gallon tank mentioned above, I just bought an ATI drive hub and am still looking for a 3-4 stage pump with right side mounting bracket and a pan with 2-3 scavenge ports on the right side.