ON SALE!!! C5 Coupe/FRC/Z06 "CROSS-BAR" w/camera mount
#1
Former Vendor
Thread Starter
ON SALE!!! C5 Coupe/FRC/Z06 "CROSS-BAR" w/camera mount
ON SALE!!! RD Racing C5 Coupe/FRC/Z06 "CROSS-BAR" w/camera mount
The C5 "CROSS-BAR" mounts high like our C4 bar, with mounting brackets that prevent the bar from rotating and allows the bar to become an integral part of the car. There are anchor straps that run down to the seat mounting studs to insure that the bar does not rotate and makes the bar rock solid. The bar is high enough to insure that bracket flexing is not an issue, but low enough to keep a clear view in the rear mirror. There are no modifications to be made to your car, and the "Cross-bar" can be removed in approximately 15 minutes. Also included with each bar is a center mounted camera mount that attaches to the bottom side of the bar. The design criteria of our C4 bar, carries over to the C5 units, in that the seats may be moved and reclined rearward as far as needed. This allows the driver and passenger to travel comfortably during the week and be ready to race on Saturday.
The "CROSS-BAR" is made from 1-1/2" square medium weight tubing and weighs approximately 14 lbs with brackets and hardware. *Only available in black*
$375 SHIPPED!!!
If you have any questions please send a pm or email us at sales@pinnacleautoworks.com
The C5 "CROSS-BAR" mounts high like our C4 bar, with mounting brackets that prevent the bar from rotating and allows the bar to become an integral part of the car. There are anchor straps that run down to the seat mounting studs to insure that the bar does not rotate and makes the bar rock solid. The bar is high enough to insure that bracket flexing is not an issue, but low enough to keep a clear view in the rear mirror. There are no modifications to be made to your car, and the "Cross-bar" can be removed in approximately 15 minutes. Also included with each bar is a center mounted camera mount that attaches to the bottom side of the bar. The design criteria of our C4 bar, carries over to the C5 units, in that the seats may be moved and reclined rearward as far as needed. This allows the driver and passenger to travel comfortably during the week and be ready to race on Saturday.
The "CROSS-BAR" is made from 1-1/2" square medium weight tubing and weighs approximately 14 lbs with brackets and hardware. *Only available in black*
$375 SHIPPED!!!
If you have any questions please send a pm or email us at sales@pinnacleautoworks.com
Last edited by Pinnacle Corvette; 08-04-2008 at 04:40 PM.