FS: Several V710s, A3S05s, and A6s
03-22-2010, 01:36 PM
#1
Racer
Thread Starter
Member Since: Jun 2004
Location: Reinholds PA
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
FS: Several V710s, A3S05s, and A6s
I have these for sale. Cleaning out garage. These fit on C4 ZR-1 wheels. Typical ZR-1 setup is frt/rear: 17x9.5, 56mm offset and 17x11, 50mm offfset. I would run them on my C5 for AX and HPDEs.
2- A3SO5s; 315/35ZR17; date of manufacture - 3305 for both, remaining tread depth = 1/32"
2- A6s: 315/35/17; dom - 4107; remaining tread depth = 1/32"
3 - V710s; 315/35/17; dom - 1 at 3205, 2 at 1905 ( one of this pair has a small chunck out of the tire in the middle of the ground contact area ( about .25" and .50")
Would like $35/tire + shipping or pick them up.
These tires weight about 23.2# and 27.7# respectively for the Hoosires and Kumhos. Zip code here is 17569.
2- A3SO5s; 315/35ZR17; date of manufacture - 3305 for both, remaining tread depth = 1/32"
2- A6s: 315/35/17; dom - 4107; remaining tread depth = 1/32"
3 - V710s; 315/35/17; dom - 1 at 3205, 2 at 1905 ( one of this pair has a small chunck out of the tire in the middle of the ground contact area ( about .25" and .50")
Would like $35/tire + shipping or pick them up.
These tires weight about 23.2# and 27.7# respectively for the Hoosires and Kumhos. Zip code here is 17569.
03-22-2010, 01:39 PM
#2
Melting Slicks
Still two grooves on the 315 A6's?
03-23-2010, 10:58 PM
#5
Melting Slicks
Stiffer springs, 1-1/8" front bar with adjustment holes (a la T1 rear bar), and Koni single adjustables, and Hoosiers.
03-26-2010, 09:14 AM
#7
Melting Slicks
I am waiting on pics of the A6's also.
