BrianCunningham

In order for more people to have access, I've uploaded my SolidWorks model of a C4 suspension (late model) on 3DContentCentral

http://www.3dcontentcentral.com/part...&catalogid=171

It is to model the pickup points to study rollcenters, anti-dive angle etc.
It is NOT meant for component fitment
Some parts are greatly simplified Links are modeled as rod ends as I have rod ends on my 1995 Corvette

I'd also uploaded a model of a C3 Stubaxle

http://www.3dcontentcentral.com/part...&catalogid=171

Crepitus

Thanks for posting. I have a 84 so my results will vary. Where did the RC work out to?

Vetteasaurus

sub'd

BrianCunningham

For the stock setup getting
3.5 front
4.0 rear

But I need to change it to reflect my new ride height alignment and DRM brackets