18x12 C5 Z06 wheels
01-18-2019, 04:26 PM
#4
IIRC the Z06 style were custom made... ForgeStar has 18x12's in the right offsets for great pricing and they are light for a 18x12 option. That's where I would look if you don't want very expensive options.
01-22-2019, 11:40 AM
#6
Safety Car
Short answer...I don't think anyone still makes them.
However, there are companies that can widen wheels...buy stock rears and have them modified. I would doubt the wheel wells can afford to have another 1.5" of wheel/tire width toward the inside, therefore you would need to adjust offsets again.
However, there are companies that can widen wheels...buy stock rears and have them modified. I would doubt the wheel wells can afford to have another 1.5" of wheel/tire width toward the inside, therefore you would need to adjust offsets again.
01-23-2019, 03:10 PM
#10
Safety Car
house of wheels makes them in the C7 Z06 style.
i would have bet money they still make them in C6 Z06 style too, as i see them post on this forum, but i dont see them listed here anymore. just the C7
http://www.houseofwheelsonline.com/corvette_copies.php
i would have bet money they still make them in C6 Z06 style too, as i see them post on this forum, but i dont see them listed here anymore. just the C7
http://www.houseofwheelsonline.com/corvette_copies.php
01-26-2019, 12:41 AM
#11
Sorry it’s been a busy week! The 1.5 inches added to the stock Speedline all goes to the inside so these are 9.5 inch backspacing, or +75 offset. My car was tubbed just about 1 inch. The nice thing is they don’t stick out at all.
The following users liked this post:
Rx7Rob (01-26-2019)